A reply's display list holds every glyph of it and is re-recorded
whenever drawing is invalidated, so one long message costs as much to
draw as a hundred short ones and skipping the rows around it cannot help
while it is the one on screen. That was the whole of the remaining draw
cost: 97% of rows correctly skipped, and the tallest one still drawn was
36,982px -- about twenty-five screens in a single message.
So a message is cut into its top-level blocks and each is drawn, or not,
on its own. The cut comes from the parser's own boundaries rather than
from a line scanner looking for blank lines, which is what makes it
safe: a heading, a table, a fenced block and a list are each one node
whatever is inside them, so a loose list does not become five one-item
lists and a fence is never split down the middle. Checked against a real
reply whose list items are separated by blank lines -- it still draws as
one list with its bullets aligned, which is the case a blank-line split
gets wrong.
It bounds parsing too, which was the other symptom in the same reading:
one message took 1.4 seconds to parse as a single unit, and a block is a
paragraph.
The row and the message each know half of where a block is, so they meet
at an interface declared where it is used: the list supplies the row's
position, the message supplies the block's offset inside it, and drawing
a message does not have to know it is inside a transcript.
What this cannot divide is a single node, and a long fenced code block
is one -- so the report now also carries the tallest *drawn block*,
which is the number that says whether splitting bounded anything. This
emulator's tallest row is one such fence, which is why its own figures
do not move.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
"Drawing costs too much" and "drawing was skipped and still costs too
much" need opposite fixes, and a millisecond figure cannot tell them
apart. So the report now carries how many rows were drawn, how many were
skipped, and the height of the tallest one that was drawn.
The first reading answers it. Skipping works -- 854 rows drawn against
24,078 skipped, so 97% of the transcript is correctly not being recorded
-- and the tallest row that *is* drawn is 36,982px. One assistant message
about twenty-five screens tall, whose display list holds every glyph of
it, re-recorded whenever drawing is invalidated. A row that size is a
hundred short rows as far as the draw phase is concerned, and no amount
of skipping its neighbours helps while it is the one on screen.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Iris's Pixel 9 Pro XL said which half was costing, and it was not the
half either of us was looking at. With 138 rows loaded: layout 0.0ms at
the median, GPU 1.9ms, and **draw 13.6ms** against a 120Hz budget of
8.3ms. Nothing was being re-measured and the phone's rasteriser was
idle; the UI thread was recording draw commands for a transcript that
was almost entirely off screen.
Retaining rows was right and stays. What does not follow the same rule
is drawing: the draw pass walks the whole tree, so a list that keeps
every row alive records every row every frame, and that cost grows with
each page of history -- which is exactly what "worse afterwards" was.
Composition and measurement are what must not be thrown away, because
they are what has to be rebuilt from nothing when the reader comes back.
A display list is rebuilt from a layout that is still there.
So each row skips its own draw when it is off screen, by more than a
screen's margin either side. The check reads the scroll position from
the draw phase, so moving the list invalidates drawing and nothing else,
and it is a lookup rather than a sum -- the running totals are rebuilt at
most once a frame and only after something has actually changed height,
since adding them up per row per lookup would have made the fix
quadratic in the thing it was fixing.
Also reports the three frame phases that were missing, which is why the
phases on that reading did not add up to the total: the time a frame
spent waiting for the UI thread to be free, handling input, and running
animations. About 15ms of the 30.6 was in that gap and unattributed.
On the emulator, same transcript, before and after: draw p50 3.9ms ->
2.5ms, p90 7.3ms -> 4.2ms, p99 48.6ms -> 5.2ms. The saving there is
small because only 60 rows were loaded; it is proportional to how much
is off screen, and on the phone that was 95,000px of content against a
1,474px viewport.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A speedometer left of the usage chart, because it is the same kind of
thing about the app that the chart is about the conversation. It copies
rather than opens: a screenful of timings read on the phone is a
screenful nobody can act on, and what it produces is a message to
whoever is looking at the code.
It carries both halves of the question, because "the scroll is laggy"
has two causes and one appearance. From the platform, each frame's cost
split into its phases -- if measuring and drawing are small and the
total is large, the time is going into rasterising and no amount of
doing less work per row will move it. From the app, counts and timings
of the work the transcript actually does: rows composed, replies parsed
on the composing thread rather than ahead of it, runs grouped.
Counts rather than frame times are the point of the second half. This
emulator scrolls at the same 21ms median as the stock Settings app, so
every app-level cost here is under the floor of what it can measure and
no number taken in it says anything about a 120Hz phone. How many times
a row was composed is the same number on any machine, and it is the one
that says whether the work follows what is on screen or everything ever
loaded.
Pressing it empties both, so two presses measure two separate stretches
of scrolling rather than one and then the same one again.
The first reading from the emulator already says something: measure and
layout are 0.0ms at the median, so nothing is being re-measured, and the
cost is 3.9ms of recording the draw against 10.9ms of GPU. It also shows
60 loaded rows composing 177 times across three page loads -- every row
recomposing whenever a page lands -- which is the next thing to look at
if the phone says the work is ours.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`onPlaced` on the transcript content is the one callback left that would
run every frame, and on all but the two frames of a restore it looks at
a null and returns. Attaching it only while a position is waiting says
that in the modifier chain rather than in a branch inside it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Asked for: more space between the header icons, and a box tall enough to
fill the header rather than sitting inside it. 48dp does both -- the marks
stand 31dp apart and 31dp from the screen edge, measured on the emulator,
where the 40dp square had them 23dp apart and 27dp from it.
It is also the platform's minimum touch target, which the previous size
was short of, and it is taller than any header's text: the session
header's row now takes its height from the button and needs no vertical
padding of its own, for the same reason the rows add no gap between two
buttons. The ring around the mark is still the only spacing rule; every
number here moved because it did.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Holding every row alive turned two per-row callbacks from a cost paid by
whatever was on screen into a cost paid by everything ever loaded, which
is why loading one more page of history made the whole transcript lag
and each page after made it worse. Both fire for every registered node
on every layout pass:
- an `onGloballyPositioned` per row, kept so a tap could be told which
half of the row it landed in
- an `onGloballyPositioned` per clickable inside a row, for the same
reason, so a tool group paid several
Neither is needed. One gesture detector on the whole list records where
a touch went down in the content's own coordinates, and the row's own
start is added up from heights when somebody actually taps -- so the
transcript keeps a height per row, which changes when the row does, in
place of a position per row, which is wrong the moment anything scrolls.
Positions for the saved-scroll anchor come from the same sum, and the
anchor is applied once per layout from the content rather than once per
row.
The reply cap is gone at Iris's request; she wasn't seeing it and does
not want it for now. It was doing measurable work -- p50 rises from 16ms
to 20ms on the emulator with it removed -- so it is worth knowing where
to look if long history feels heavy.
That 4ms is the only figure here I trust. This emulator's own noise
between identical repeats is larger than the difference the callback
change makes (identical builds measured 3.5% and 9.3% of frames over
budget), and its p50 of 16ms is already past a 120Hz budget, so it
cannot rank any of this the way the phone will. The callbacks are gone
because they are O(rows) per frame by construction and the list no
longer bounds how many rows there are -- not because a number here says
so.
Checked on the emulator against a real 1,200-event transcript: tapping a
collapsed row expands it with its top edge held exactly still, and a
scroll position comes back pixel-identical after leaving the session and
returning.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Every gap around a header icon now comes out of the button's own padding:
one ring to the screen edge, two where a button meets its neighbour. The
box was the size of the mark (28dp) and the separation was bolted on
beside it, so on the session header the two marks stood 31dp apart while
the outer one was 14dp from the edge of the screen -- a pair that acts on
one screen reading as two unrelated marks, one of them falling off it.
Measured on the emulator at 40dp: 23dp between the marks, 27dp to the
edge, and the same ring above and below.
The mark was also not square, which is why an arrow looked taller than it
was wide. `Glyph` is a `Text`, and it inherited the body style's 24sp line
height around a 17sp mark; this font's ascent and descent add up to
exactly one em, so a line height of the point size is the square the glyph
draws in. That leading is also what a button's padding had to be measured
through.
40dp is Material's own icon-button state layer, and it is what the
pressed-state ripple draws -- at 28dp that circle was inscribed in the
mark's corners, and beside a title it arrived at the first letter. The
touch target comes up with it, from well under the platform's 48dp
minimum to within 8dp of it; going the rest of the way would put the marks
back 31dp apart.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The transcript is a plain Column scrolled in reverse instead of a
LazyColumn. Nothing about Compose was re-measuring text that had already
been drawn -- a node that is still alive and whose constraints have not
changed skips measurement outright, in MeasurePassDelegate.remeasure.
What was throwing that away was disposal: a lazy list drops a row the
moment it leaves the viewport, and the markdown tree, the measured lines
and the cached paragraph go with it. Keeping the rows is the fix, and it
is what a browser-based client does that we were not.
Two scroll corrections go with it, each of which had a comment
explaining a way it had been seen to fire at the wrong moment. The
content now hangs from its newest end, so a page of older history
extends the far end and moves nothing on screen, and an arriving message
extends the end the viewport is already pinned to. Following the newest
message is no longer an effect that notices and corrects; it is where
the content is. The same goes for the keyboard opening, which was the
case that used to get missed.
Paging asks its question in pixels of scroll -- how far can the reader
keep going before they run out -- which is what it was always about.
Rows were the wrong unit twice: a fixed count of them is a distance only
by accident, and counting screenfuls of rows fixed the size of that
mistake without fixing its kind.
A saved position is resolved to the row that now holds that seq before
the layout is asked to put it back. The events behind a row regroup
between the save and the reopen, so the seq that was a row's first is
often no longer any row's first, and handing the layout the saved seq
named a row that did not exist -- the position was never applied and the
session opened at the newest end.
Verified on the emulator against a real 1,200-event transcript: the
position survives leaving and reopening, jump-to-latest arrives and
stays followed, and the newest message holds its place against the
composer as the keyboard opens and the draft grows. Scrolling measures
the same as the lazy version did (2.6% vs 2.0% janky, p50 16ms, p90
21ms, no slow UI-thread frames either way) -- the cap and the
off-thread parse had already taken that cost out, so this change is
about what the list can no longer do wrong rather than about frames.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Iris approved the cap and set the one exception: never the latest
response. That one is being read as it arrives, often still arriving, and
putting "show the rest" under the turn somebody is waiting for hides the
answer they are waiting for. Everything behind it is history, which is
what this is for.
The limit is on the **source**, not on the height, and that is the whole
point. Clipping a laid-out row to a height saves nothing -- Compose
measures the text and throws the overflow away, so the line-breaking has
already happened -- while cutting the string before it is parsed stops
the work being done at all, the parse included. Four thousand characters
is about two screenfuls, with a thousand of slack so that a reply barely
over the limit is not given a control worth nothing to anybody.
The cut is at a line ending, because a markdown source cut mid-line is a
different document: half a heading marker, a list item with no bullet, a
link whose closing bracket was dropped. A fence left open is closed,
which is the one case a line boundary does not cover -- an unterminated
``` swallows the rest of the reply into a code block, so the truncation
would change how the part still on screen is *drawn* rather than only how
much of it there is, and a reader cannot tell that from the reply
genuinely having been code. Verified against a reply whose cut lands
inside a 400-line Rust block: the block renders as a block, closes, and
the control sits below it in ordinary text.
`markdownIn` now names both forms, because which one a row draws is not
decided there -- so pressing the control is a cache hit rather than a
50ms parse on the frame it happens in, and neither form is a key that no
row ever looks up.
Measured on the emulator, now that it renders on the GPU and its frame
numbers mean something -- two flings over replies of the same size in the
same session, one capped and one not:
uncapped 62,310 capped 54,990 (4,000 drawn)
janky (legacy) 58.20% 11.33%
slow UI-thread frames 5 1
p50 23ms 16ms
p90 30ms 24ms
The modern "Janky frames" figure is 4.04% against 3.59% -- near identical,
because both stay inside the compositor's deadline on this emulator. The
win is UI-thread work, which is what was aimed at, and the legacy metric
is the one that counts it.
Expanded is remembered by the screen, beside the other expansion sets, so
scrolling away and back does not shut something deliberately opened.
Known and not fixed: the floating jump-to-latest control is centred at the
bottom of the list and overlaps this one's label whenever a capped reply's
foot lands in that band. It is the overlay's pre-existing disregard for
content -- long replies have always had text under it -- but a control
there is worse than prose, and it is now common rather than incidental.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The five-hour window's reset time is absent between blocks, because the
window is anchored to the block it started in and there is nothing to reset
until one is running. Measured against a live response: the reset came back
as exactly five hours after work resumed, and the weekly windows in the same
response carried the identical microsecond, so both are computed from one
now() at request time. The weeklies always have a reset because a week is
always running -- which is why only the five-hour row looked wrong.
`remainingUntil` returned null for that and for a timestamp it could not
parse, so the session bar announced "reset time unknown" about a machine
behaving perfectly, on the one row somebody reads before starting something
big. The usage dialog, looking at the same field, drew nothing at all and
printed a raw ISO string when a parse did fail. One missing value, two
rules, and neither of them right.
`WindowEnd` names the three answers and both callers go through it. A window
that is not running shows its percentage and no countdown, in the bar as
well as the dialog; an unreadable timestamp says so in words rather than
showing itself.
Looked at both on the emulator, the second by making the server drop the
field: 15% with "4h 43m left" when a block is running, "13%" alone when none
is, and the dialog's five-hour row with no reset line beside weeklies that
have one.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two places said the history cushion's evidence was a swipe that moved
nothing for 689ms. That reading came from `ui-trace show` on a row taller
than the viewport, which reports clipped bounds and so prints "nothing
moved" for a list that is scrolling fine -- and it was taken on the software
renderer besides. The finding it supported is sound and has a better
witness: counted at the server, ten swipes asked for ten pages before the
change and three after, which does not depend on how anything renders.
Also records what the screen actually costs now, measured on the GPU
emulator: 5.2-5.9% janky frames and 0-2 slow UI-thread frames flinging fast,
against 3.3% for the stock Settings app on the same device. With the note
that matters for repeating it -- let the screen settle before resetting
gfxinfo, because the first seconds after opening a session are every row
being composed for the first time and read three times worse.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Now that a scroll anchor is a seq, the restore knows exactly how far back
it has to reach, so it asks for that span in one request instead of
walking there a page at a time. ai-app-2 suggested it; the arithmetic is
theirs. `read_window` counts lines and a transcript numbers them one per
seq, so the distance to the anchor is the number of events to ask for --
and were seqs ever sparse, that difference is larger than the count,
which overshoots into older history rather than stopping short.
Capped at [RESTORE_PAGE_MAX], and the loop already there is what makes
the cap safe: a span past it comes back in several requests rather than
one, which is what every restore did until now. The bytes are the same
either way -- every row between the anchor and the newest end has to be
loaded for the list to be able to count to it -- so this only trades
round trips against response size.
Measured on a 16,133-event session, restoring to seq 2000 (14,133 events
back, the extreme case): **19 requests before, 5 after.** The realistic
case, a couple of thousand events back, is 4 before and 2 after. At
`--delay 150` the deep one puts the row on screen at 5.7s and the
moderate one at 2.5s, and in both the row does not move once it lands.
Also: `RUST_LOG` did nothing. `with_env_filter("info")` is a fixed
directive that never reads the environment, so the per-request page
diagnostics AGENTS.md tells you to turn on with `RUST_LOG=ai_server=debug`
printed nothing at all -- which reads as the code you are instrumenting
being wrong rather than as the switch being disconnected. It is a
fallback now, so the default is still `info`. Those diagnostics are what
the request counts above were measured with.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Three things, all of them the same complaint: scrolling back through a long
session stalls.
**The fold was on the main thread.** Only `fetchTranscript` was inside
`withContext(Dispatchers.IO)`; the fold loop that turns a page into rows ran
on the caller's dispatcher, which is Main. `foldEvent` returns a new list
per event, so a page is that many copies of a list growing to that length --
about three hundred thousand element copies -- run in the middle of the
scroll that asked for it. Affordable at 80 events per page and not at 800.
**`warm` scanned the whole transcript on the calling thread.** Only
`replies.warm` was off it; the `markdownIn` split that decides *what* to
parse ran before the hop, over every assistant message loaded, on every
page. The scan grew with the conversation while the work it found stayed one
page's worth.
**The cushion was eight rows, which is not a distance.** A row is anything
from one line to a page: on a tool-heavy transcript eight rows is less than
one screen, so the reader reached the end of what was loaded on every swipe
and waited a round trip standing there. It is three screenfuls now, measured
from what is actually on screen. On the emulator against a 24,000-event
transcript that is 3 page fetches for 10 swipes rather than 10.
Also a spinner while a chat loads. Nothing is drawn while the newest page is
in flight or a saved position is being put back, and a blank page is what
this screen otherwise means by "there is nothing here" -- so the state that
does not know needed its own appearance.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A command, a tool's output and a code block in a reply are the one thing on
this screen that is not somebody's prose, and they now say so: Mocha's
Crust, which sits below Base, so the same colour is one clear step down both
on the page where a reply is drawn and on the card where a tool call is.
The renderer's code background was `surfaceVariant`, which is exactly a
card's own fill -- a fenced block inside a tool call had no background at
all, and one in a reply read as a step *up* out of the page.
Tool output takes the monospace face with it. It is column-aligned far more
often than it is prose -- a listing, a diff, a table of numbers -- and a
proportional font silently destroys the alignment that carried the meaning.
`RawBlock` is a composable rather than a modifier because the inset is part
of it: monospace text against the edge of a tinted block reads as clipping.
A call with neither a subject nor any other field draws nothing at all
rather than an empty tinted rectangle.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
ai-app-2 found the reason a session Iris had scrolled in took a while to
open, and it is a defect in what I shipped this morning. A `ScrollAnchor`
stored the list's own row key. That key looks stable and is not: a tool
row is named after its run, `joinPages` gives a run the name its *newest*
half carries, and the newest half is whatever the newest page happened to
start with. The newest page is the last eighty events, so the name is
fixed for an idle session -- which is why this passed on the emulator --
and changes the moment the session says anything. An active session
therefore renamed its tool runs on every reopen, the anchor was never
found, and the restore paged backwards until there was no history left,
i.e. to the first event of the conversation.
So the anchor is a sequence number now, taken from the oldest event
behind the row. That is the server's own numbering: assigned once, never
moved, the same on every device. The restore finds the last row starting
at or before it, so it still lands correctly when grouping has changed
underneath it -- a run folding differently, two halves of a reply
becoming one message -- and the page-back loop gains an exact stop,
because `oldestSeq` walks strictly backwards and a row always matches
once the window passes the anchor. It cannot run to seq 1 any more.
`TranscriptRow` now carries `startSeq` beside `key`, and the two are
documented against each other: `key` is the list's identity and a display
decision, `startSeq` is a place in the conversation. Anything that has to
point at a place and find it later uses the second.
Two more found while testing this, both the same shape -- a listener
waiting for a scroll to *end* never runs when the list moves inside one
frame:
- The anchor was read from `rows`, which a `LaunchedEffect(listState)`
captures from the first composition, where it is empty. Every scroll
saved a null anchor, indistinguishable from being left at the newest
end, so the position was silently never recorded at all. It reads the
live state now, as the paging code beside it already warned it must.
The anchor is also written from the settled *position* rather than from
the scroll flag, because Jump to latest snaps within one frame: it left
the old position recorded, so pressing the control that means "take me
to the end" and coming back put the reader where they had been.
- Jump to latest did not set `followTail` either, which is the same hole
in the sibling and predates today: the view landed at the bottom with
following switched off, and the next message did not bring it along.
The button states what it means now. `followTail` itself stays on the
scroll settle, deliberately -- a keyed list moves its own anchor when a
row arrives, so the position reports itself as scrolled back for a
frame every time a message lands, which is the whole reason that value
is remembered rather than read.
Verified against an echo session grown to 1,327 events between saving the
position and reopening, so the newest window slid and the runs were
renamed: the same row is on screen before and after, it appears 419ms in
and never moves, and a 200-piece streamed reply still follows the bottom
after a jump.
The threading of `loadOlderPage`'s fold is ai-app-2's, not touched here.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Five things Iris asked for, all about the transcript screen holding still
around whoever is reading it.
A tool call opened on its own stayed open when a second call in the same
run turns it into a group. Watching a Bash call and having the session
make another one used to shut the card being read and fold it behind
"Called 2 tools" -- the reader lost their place because something else
happened. The transition is noticed once, at the moment a run first
becomes a group; after that the group's own toggle owns it, so shutting a
group whose inner call is still expanded does not re-open it.
The compaction clock is taken from the `compacting` status event's own
timestamp rather than from this device noticing one, so it survives
leaving the session and coming back -- it used to disappear, because the
only thing that knew when the compaction started was a screen that had
been disposed. The server timestamps every transcript line, so this is
still a measurement; it is compared against the phone's wall clock, which
is the same comparison a session's "last active" already makes.
Session settings are a dialog over the session instead of a screen below
it. Two controls did not warrant a page transition and a back stack, and
the thing they change was hidden while they were on screen. Captions are
gone -- each control is a labelled noun -- and "Notify me" is
"Notifications" with a bell beside it (`md-bell`, added to the committed
Nerd Fonts subset). Failures keep their words, since those are what a
reader cannot work out by looking.
Tool groups are rounded like every other card, their foot bar is the same
height as their heading (both derived from the heading's own line height,
so the pair cannot drift), and the calls inside are a connected stack:
square where they face a neighbour, rounded on the outside, with a small
gap so the join reads as a join.
Scroll position is persistent on the device, per session, keyed by the
row rather than by an index -- an index means nothing across a reopen,
where the transcript is fetched newest-first. Reopening pages backwards
until that row is loaded *and* has something older behind it, because the
oldest loaded row is a half-row that grows when the page behind it
arrives; anchoring into one landed a screen and a half out. The list
draws nothing until the position lands, so there is no frame in which the
transcript is somewhere other than where it was left.
Two things found on the way. `snapshotFlow`'s first emission is the state
before anybody has touched the list, and reading it as a scroll that had
just ended at the newest end wiped every saved position on the way in.
And backwards pages now ask for 800 events rather than 80: ai-app-2
measured a real transcript at 2,426 events for seven assistant messages,
so a page of eighty is a fifth of one row and filling the lookahead took
about thirty sequential round trips -- seconds of a list that will not
move, over the tunnel.
`/tools [n] [gap]` in the echo driver takes seconds between calls, which
is what makes a run grow slowly enough for somebody to have opened one of
its calls first.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Both faults needed a real conversation to see, so `app/debug-transcript.sh`
now puts one on the emulator: it copies a Claude Code transcript into /tmp,
gives an ai-server a HOME of its own so the import can only see the copy, and
enrols the app against it. The transcript itself never enters this repository
-- those files hold whatever was said, read and written in a session. Beside
it, `ai-server --delay MS` holds every response back, because a phone's
requests take tens to hundreds of milliseconds over the tunnel and several
faults live entirely in what the app does while one is outstanding.
**Scrolling up threw the reader back to the newest end, once.** `followTail`
is deliberately a remembered answer, rewritten only when a scroll settles, so
for the whole of a fling it still reports the newest end -- where the reader
was when they threw it. A page of history landing during that fling is a
change in the item count, and the correction written for an insertion at the
newest end fired for one at the oldest. Captured on the emulator:
scrolling=true atNewest=false followTail=true
history: START last=20 total=28
history: page of 80 events -> rows now 36
countChanged count=36 followTail=true scrolling=true
>>> scrollToItem(0) SNAP
It could happen only once, which is what made it look arbitrary rather than
mechanical: the snap settles the scroll at the newest end, so the next fling
gets far enough to settle away from it, and from then on `followTail` is
false. So the list is no longer moved while a scroll is running, which is a
rule of its own rather than a refinement of that condition -- and skipping
the correction outright is right rather than merely safe, because the count
can only grow at the newest end while the reader is already there, `record`
holding everything else until they come back.
**A page of history stalled the frame it appeared in.** Parsing is the
expensive half of drawing a reply and costs in proportion to what was
written: against this transcript one message took 51ms and several took
10-25ms, where the synthetic replies this was tuned on took 4.6ms. So each
page's replies are parsed on a background thread as the page arrives --
after the join, since a boundary falling through a reply leaves a message
made of both halves whose text has existed for no time at all, and warming
the page alone warmed the two halves and missed the one thing drawn. A row
with no answer waiting still parses inline: a row measured at nothing before
it is measured at its real height collapses the transcript above it. Misses
are not stored, so a reply still streaming cannot fill the map with copies
of itself on the way to being finished.
Measured over the same twelve flings: 13.5ms average per composed reply
before, 7us after, the remaining parse being one message at session open.
Verified with ui-trace at 1kHz: with a page landing mid-drag the suppression
fires and the row the reader is on moves monotonically down, 266 -> 1063,
with no step backwards; at rest 0 of 65 elements move. 86 server tests pass,
ktfmt/lint/clippy clean.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A session adopted at a backend start keeps the transcript's last status,
so one whose process had been reported gone and was then found again
read as `exited` while its CLI was running. `exited` is the word that
draws the phone's Start button and lets `start_session` build a driver,
so Start was accepted every time it was pressed -- and since starting
replaces the driver without retiring the old one, each press left
another reader on the same process. Every line the CLI wrote was then
translated once per reader: three presses put three interleaved copies
of one reply on screen, which is what it was reported as.
So `exited` is now checked against `session::process`, the one authority
on whether a process exists, in `launch` and again in `start_session`. A
record that is not known to be dead makes it false, and what replaces it
is `unknown` -- there is a process, and nothing here has heard from it,
which is the answer `status_of_unlaunched` already gave to the same
question. The correction goes out through the sink rather than into the
manager's view alone, or the list and the session screen would disagree
about it in the way this same button did a commit ago.
A driver that `start_session` replaces now gets `Driver::detach`, which
already existed for the backend going away and is the whole of what a
driver whose process has exited is owed.
On the phone the process button is disabled while its own request is in
flight, so a second press cannot be decided against a status the first
has not changed yet. That is a courtesy rather than the fix; the server
refuses it either way, because a phone that has lost the stream cannot
be relied on to know.
Verified against a stand-in CLI, with the state forced by hand: before,
three Starts returned 204 and left four readers on one process and the
status still `exited`; after, the session reports `unknown` on both
surfaces and all three are refused. Then driven on the emulator --
Stop, Start, Stop, Start alternated correctly with one process at a
time, and the list, the transcript and the record all agree.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Scrolling was laggy, and measuring said where the time went. Instrumenting
the transcript's main-thread work on the emulator, against `/stream 200`:
markdown parsing ran fifty-eight times in three seconds -- once per streamed
delta, each one re-parsing the whole message the reply had grown into -- for
49-78ms of main-thread work per three seconds, with single parses reaching
7.3ms. That is most of a frame at 60Hz and more than a whole one at 120.
Everything else the transcript does per event was under a tenth of it.
So only the first parse stays on the composing thread. That one has to: the
renderer's asynchronous path draws an empty loading slot until its result
arrives, which measures a row at nothing before it is measured at its real
height, and the whole transcript above it collapses and springs back. Every
parse after the first is the same row growing, and there is a previous parse
to keep drawing until the new one lands -- so those go to a background
thread and no frame is ever without a height. What is on screen stays a real
prefix of the reply rather than a guess at it; it is simply one parse behind.
The same measurement found `loaded` costing an ArrayList copy per event, and
nothing reading it. It recorded every event the screen had ever seen against
the possibility that a page arriving in front of them would need the events
themselves to stitch on -- but `joinPages` heals the boundary from the folded
rows and has since it was written, so this was a list that only ever grew.
Checked on the emulator with ui-trace at 1kHz. Streaming at the newest end:
the row's bottom edge holds at y=1940 while it grows upward, and the header,
status row and composer do not move for six seconds. Scrolled back with a
reply streaming: nothing moves at all, 0 of 45 elements over five seconds.
Scrolling a mixed transcript: rows keep a constant height as they translate,
so none of them arrives blank and fills in afterwards.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Which AVD this checkout means, creating it, booting it headless and refusing
to start one the machine has no room for is the same sequence in ai-app,
ai-app-2 and dev-updater. It now lives once, in ~/repos/emulator-tools, and
this script is what is actually specific to this project: a build, an install
and a launch.
Three copies of "boot an emulator" was three places for the memory check none
of them had -- starting one at 2.8 GB available invoked the OOM killer, and
what it took first was another session's emulator.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The composer's second button now says what pressing it would do to the
process behind the session, in one place that is always there: an orange
pause while a turn is running (interrupt, the process stays), a red stop
when it is not (end the process), a green play when it has exited (start it
again on the same conversation). Send is disabled while there is nothing to
send, rather than pressable and silent.
Behind it, two routes. `stop` signals the recorded process and says nothing
else -- the driver's own reader already reports a death correctly, and
announcing it here would be a guess ahead of the measurement. `start`
replaces the driver and nothing else, so the transcript, the pump and every
open phone's stream stay where they were and there is still one writer of
the transcript; it is refused unless the session is known to have exited,
since starting on `Unknown` is the two-CLIs-on-one-conversation fault.
That last rule found a bug in the launch path: a relaunched session took its
status from the transcript, so one whose process had died before a backend
restart reported `exited` while the launch had just started a new process --
which refuses every command and offers a phone the chance to start a second
CLI on a live conversation. A launch that leaves a process running now says
idle.
The icon font moves to the Mono face, where every glyph is one em square, so
two icon buttons are the same width without either being told one; the
proportional advances ran 0.46 to 0.92 em and Send came out visibly wider
than Stop. GLYPH_SIZE comes down to match, since a glyph that fills its em
draws bigger at the same point size.
Verified against a stand-in CLI on the emulator: idle -> stop -> exited ->
start -> idle, a turn interrupted from the pause button, and both buttons
measured at 171x105 device pixels.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Everything that opens now behaves alike. Touch a row's upper half and its
top edge holds, so it opens and closes downwards; touch the lower half and
the bottom edge holds, which is what the list does on its own. A group's
heading and the bar at its foot fall in the halves they already occupy, so
they keep the behaviour they had, and a single tool call -- one card, with
no bar -- gets the same choice for the first time: tapping low on an open
Bash card now shuts it downwards exactly as a group's bar does.
That makes the position of the tap the one mechanism, and RowEdge goes
away with the pair of hardcoded ends it existed to name. Controls report
where they were touched in root coordinates, which is all a control can
know -- a group is one row with a control at each end and calls in the
middle, and only the row knows where its own ends are -- and the row turns
that into an edge.
`clickableAt` is built on `clickable` rather than replacing it, so the
ripple and the click action assistive technology reads are unchanged; the
down position is observed on the initial pointer pass and nothing is
consumed.
Verified with ui-trace: on a collapsed group, a tap at y=1370 holds the
heading and one at y=1450 lets the row grow upward instead. On the same
nested call inside an open group, opening it from the group's upper half
holds the heading at 565 and from the lower half moves it to 296. ktfmt,
lint and 85 tests clean.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The correction ran in a coroutine, so it landed a frame or more after the
layout it was correcting: the wrong position was drawn once and then fixed,
which reads as a flick and gets worse the faster the screen refreshes. That
is a race with the display rather than a bug that can be tuned out, so the
fix is not a shorter delay but a different phase.
It now happens in the layout phase. `Modifier.holdTopEdge` learns the row's
new height from the measurement that produced it and asks the list to shift
by exactly that much, before anything is drawn. `requestScrollToItem` is
the form that may be asked for during layout; `dispatchRawDelta` is not --
it calls forceRemeasure and dies with "performMeasureAndLayout called
during measure layout", which cost one crash to establish.
The arming flag and the per-row height are deliberately not snapshot state.
Both are written from layout, where a snapshot write that composition reads
would schedule another recomposition -- another frame, which is the thing
being removed.
This also drops the machinery the previous attempt needed: no waiting on a
size change, no timeout, no marking the rows above to find one that could
still report the move. A row measures itself, so a row that shrinks out of
the viewport is no longer a special case.
Verified with ui-trace sampling at ~1kHz, where a single bad frame would
show as ten to twenty samples: expanding and collapsing from a heading are
each one step from old position to held position with nothing in between,
collapsing from the foot bar holds the four rows below it, a drag 120ms
after a tap is left alone, and scrolling back stays put for six seconds.
ktfmt, lint and 85 tests clean.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Reinstates the reverted downward-opening rows with the two defects that
made the first attempt worse than what it replaced.
The correction waited on the row's top edge and could wait up to half a
second for it to move. A top edge also moves when the reader scrolls, so a
correction still pending would wake on their drag, read the scroll distance
as the row's growth, and undo it -- the transcript jumping on every expand
and refusing to scroll back at all. It now waits on the row's *size*, which
nothing but a resize changes.
The second is why collapsing a group taller than the screen did nothing at
all. Such a group is the list's own anchor item, so as it shrinks it slides
down behind its anchored bottom edge and out of the viewport, and its size
reads as null -- which `withTimeoutOrNull` cannot tell from the null that
means the wait expired. The case most needing the correction was the one
silently skipped. The wait now answers a value that a timeout cannot, and
the distance is read off any row from the pressed one upwards, all of which
move by exactly the row's growth.
Verified on the emulator with ui-trace (~/.local/bin), which samples the
accessibility tree at 60Hz and reports node bounds in device pixels:
expanding and collapsing from a heading hold it to the pixel, collapsing
from the foot bar holds all four rows below it, a drag 120ms after a tap is
left alone, and scrolling back stays put for six seconds. ktfmt, lint and
85 tests clean.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
This reverts commit f4d4c82. The anchoring it added made the transcript
jump on every expand and collapse, and left the list snapping back to the
bottom when somebody scrolled up, which is worse than the upward-opening
it was meant to fix.
Two things to look at when this is retried. `LazyListItemInfo.offset` in a
`reverseLayout` list is not obviously the coordinate space this assumed,
so `offset + size` may have been measuring the bottom edge -- the one the
list already holds -- rather than the top. And the anchoring scroll ran in
a coroutine that could still be pending when the reader started dragging;
`scrollBy` takes the default mutation priority, so it cancels that drag.
Verify the next attempt with `uiautomator dump` -- node bounds in device
pixels, before and after a toggle -- rather than by eye from screenshots.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Tapping a group's heading used to send that heading up off the top of the
screen and fill the space above it, so the calls appeared on the far side
of the control that produced them. The transcript is laid out from the
bottom, so every row's bottom edge is what the list holds still and all
growth goes upward.
The rule now is that the end the reader pressed is the end that must not
move. A heading anchors the top, so the row opens downwards under it; the
bar at the foot of an open group anchors the bottom, so shutting it from
there leaves what follows the group where it is -- which is what already
happened, but by accident of the layout rather than on purpose, and would
have been lost the moment anything else changed.
Bottom is the list's own behaviour and costs nothing. Top is measured
rather than calculated: only the layout knows how tall an open group is,
so `toggleAnchored` reads where the top edge was, lets the change land,
and scrolls by however far it moved.
Applied to every row that opens, not just groups -- a lone tool call and a
peer message are the same gesture, and one of them opening the other way
would be the odder for it.
The notification stream now has three places to land instead of two, decided
in one function. Nothing at all for the session on screen, as before. A
banner over the app while the app is up. Android's drawer otherwise. Never
two of them for one moment: a drawer filling up behind an app that showed
you each one is a drawer nobody reads.
The banners queue, one per session replacing that session's own -- the rule
the drawer already followed, and for the same reason. Each can be tapped,
which opens the session by the same path a tapped notification takes;
pushed off either side; or left alone, in which case the bar across its foot
retires it. The bar and the retiring are one value rather than a bar beside
a timer, so a banner cannot outlive the countdown drawn under it. They clear
when the app goes away, since a claim that a session wants somebody *now*
does not survive an absence -- and the drawer has the job back by then.
Which of the three applies needs no flag anybody keeps level. The session on
screen is registered by the one composable that draws one, and "the app is
up" is the queue being collected, which happens exactly while it is.
Also: tapping a model or permission button while its own menu is open now
closes it. A non-focusable popup does not swallow the press that dismisses
it, so the same finger was reopening what it had just closed -- measured at
3ms between the two, which is what the guard is sized against.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A session whose loaded rows were shorter than the viewport drew them
against the top of the list, leaving a gap between the newest message and
the box you type in -- and nothing to scroll, because there was no
overflow. Opening the keyboard shrank the viewport enough for the content
to overflow it and the list snapped down, which made a placement fault
look like a scrolling one.
`reverseLayout` defaults the arrangement to `Bottom` on its own, but
naming `spacedBy` replaces that default with `spacedBy`'s own, which is
`Top`. The arrangement is only consulted when the content does not fill
the viewport, which is why this sat here since 2026-08-28 without being
seen: it needs a session that loads less than a screenful, and a page of
tool calls collapsing to one "Called 80 tools" row is how a long
conversation manages that.
Three things about the session screen.
A notification is no longer posted about the session in front of you: the
transcript is already saying it, and one that was posted before you opened
it is cancelled, since a row in the drawer for the conversation on screen
is the same duplication. Bound to RESUMED rather than STARTED, so a session
left on this screen behind another app still reports.
The model and permission menus opened 142px clear of the buttons that
opened them -- the status bar's height, exactly. Compose measures the
anchor in window coordinates, which for an edge-to-edge activity is the
whole display, but asks whether the menu fits inside the visible frame,
which is that less the system bars; sitting just above a control near the
bottom then reads as an overflow and Material3 parks the menu near the
bottom of the visible frame instead. Turning clipping off makes both
questions about the same window.
The model picker now offers "default". The button has always been able to
say it -- that is what a session with no model of its own reads as -- but
the list could not, so choosing any model was a one-way trip. It is the
Claude CLI's own word for "whatever is configured", which its set_model
accepts, so it is a request rather than a name invented here.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
An AskUserQuestion arrived in the middle of a run of tool calls and was
folded into the collapsed card with them, so the one row where somebody
was asked something -- and the answer they gave -- was hidden behind
"Called 6 tools" like any other grep.
It now starts a run of its own and ends the one before it, which needs no
change to the grouping: a run of one is drawn as itself. The calls around
it become a group before and a group after, so where the work stopped to
ask is legible from the shape of the transcript without opening anything.
Echo's `/ask` now runs three ordinary calls on each side of the question,
because that is the shape this has to be looked at in and there was no
way to produce it.
The number on the status row was a running total of tokens spent, so it
could only ever climb: a session compacted from 128k down to 10k, or
cleared outright, went on reporting the larger figure, and disagreed with
the divider directly above it saying what the compaction had recovered.
It now reports what the model is holding -- prompt plus both cache
figures -- folded through `driver::context_after`, which is the one rule
the pump, the transcript and the phone all use: a turn sets it, a
compaction replaces it with what the compaction measured, and a clear
leaves it unmeasured. Unmeasured says so in words, because an empty
context and one nobody has counted used to look identical.
Taken from the turn's last assistant message rather than its `result`:
measured against CLI 2.1.237, a two-message turn reported a cache read of
40,211, being 14,259 and 25,952 -- the same conversation counted twice,
and no size the model ever held.
Tapping a notification landed on whatever the app was last showing. It now
opens the session it named. The id rides in the intent's data rather than an
extra, because PendingIntent identity is Intent.filterEquals -- with an extra
every session's notification would share one PendingIntent and every tap would
open whichever session was notified last. MainActivity sorts the aiapp:// URI
by host, so enrollment and this are one entry point rather than two.
The notification carries only an id, so the session is fetched before there is
a screen; a fetch that fails says so and offers to try again, since somebody
deliberately tapped and an app that opens to the list explains nothing.
That made session-to-session navigation reachable for the first time, and it
crashed: SessionScreen remembers a transcript and an event stream, and without
a key Compose kept both across the change and merged two conversations into
duplicate list keys. Keyed on the session id.
The two transcript dividers now say only what they are, centred between two
rules: "Compacted <bullet> 128,402 -> 9,617 tok" in blue, and "Context cleared"
in red. The rules stay the ordinary divider colour -- they are framing, and the
words are what carries the meaning.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
irisandClaude Opus 5