A retained part is re-expressed as a fraction of its new box by dividing by
the old box's extent, and that extent is one whenever the box spans the whole
of its parent's -- which is the common shape. An integer division is the most
expensive thing in `apply_scalar` and it ran twice per span.
`perf stat -e instructions:u` over 500 frames: `many` 1,938,264,572 to
1,886,265,821, `scroll` 452,517,906 to 444,792,314.
Tried first and reverted: short-circuiting a fraction of nought or one, at
either end of the box. That is not the common case, and the two comparisons
cost 17% more than the divisions they were meant to save.
Checked: fmt, clippy, 105 tests, three shrinker cases at 300 seeds, 100
generated seeds.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A placed glyph's offset is whole pixels by construction -- a floored pen
position plus the entry's integer bearing -- and `Painter::glyphs` was
converting it, and the entry's width and height, from `f32` on every frame
that drew the glyph. It is a `PxVec2` now, converted once when the text is
placed, and the size is two integer shifts.
Measured with `perf stat -e instructions:u`, since the difference is smaller
than this machine's clock: the `many` phase went from 2,013,099,594
instructions to 1,938,264,572 over 500 frames, 3.7% less. `scroll` and
`repaint` are unchanged to within noise, which is right -- they do not redraw
glyphs.
Checked: fmt, clippy, 105 tests, the reorder fuzzer at 300 seeds, and `tabs`,
`text` and `random` byte-identical.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Which end of the answer each bound comes from is known from the sign of the
fraction before dividing; taking the min and max of four divisions asked the
question twice. A division is the most expensive thing in that function and
it runs per child per axis.
`many` 0.283 ms a frame to 0.278. Small, and strictly less work.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Fixed point cost 3x in layout: `many` went from 0.179 ms a frame to 0.544,
and `scroll` from 0.011 to 0.030. The counters said why -- eight more "placed
by redrawing" a frame -- and the reason was mine rather than the grid's. A
retained drawing belongs to the layer it was made on, which `4e28f10` started
enforcing, and `Stack` measures the child that sizes it by drawing it on its
own layer and then draws it again on the child layer. So every stacked child
redrew twice a frame, forever.
`Painter::child_layer_at` addresses a child's layer rather than walking to
it, and `Stack` measures on the layer that child ends up on. The second ask
is then a reuse. Its glyphs are written once rather than once under the
background and once over it.
Measured on the same fixture: `scroll` 0.031 ms to 0.020, `many` 0.570 to
0.283, and the scroll phase's counters are back to what they were before
fixed point -- 4 widget draws and 12 draw requests a frame, exactly. What is
left above that baseline is not this.
`ReuseOutcome` could not say "another layer" or "the region-node choice
changed"; both returned without a counter, which is why the first look at
this said nothing. They have counters now.
Checked: fmt, clippy, 105 tests, five shrinker cases at 300 seeds, 100
generated seeds, and the examples byte-identical but for 36 pixels of
`random` at one level -- edges that were being drawn twice.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`Scroll` reports `LEFTOVER` on both axes because it clips its content to its
box: it can neither take less of one nor honestly ask for more. `Masked` is
the other widget that clips and was passing its inner's size up, so a mask
over something taller than its box asked to be placed at the length it had
just cut off. It reports its box now, for the same reason.
The `debug_assert` the handoff has been asking for is the one that would have
caught both, narrowed to what is actually true: a widget that set a mask this
draw has to report inside the box it drew in. Reported as "does not exceed
the box" it fires on ordinary overflow instead -- measured, a hundred fuzzer
trees produce thousands of them, every one a text too tall for the box it was
offered, which is what a text is meant to say.
`tests/cases/scroll.rs` has a clipping widget that reports its content, to
show the assertion catches it.
Checked: fmt, clippy, 104 tests, all five shrinker cases at 300 seeds, 100
generated seeds, five examples byte-identical at 1920x1200.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A span is as long across itself as its longest child, unless a rule beside it
already says how long it is -- and then reading the children answers nothing
and only makes its size depend on theirs. `OrthoSize::Full` was that second
case written twice, once as an enum on the span and once as the rule that
actually decides; `Painter::ruled` lets the span ask which it is in. The
widget under a rule still does not learn what the rule says, only that its
answer for that axis is not wanted.
The fuzzers grow, lay out and drop a tree within one seed, so the seeds share
nothing and take a thread each, one short of every core. Measured here: the
generated oracle's hundred seeds went from 68 s to 10 s, and a shrinker case
at 300 seeds from 18 s to 3.5 s. A seed that fails still shrinks and panics
on its own thread, and `std::thread::scope` carries that out.
The shrinker now allows the two steps the oracle already did -- the deeper
trees these grow reach a second composition, and a step is a thousandth of a
pixel.
Checked: fmt, clippy, 102 tests, all five shrinker cases at 300 seeds, 100
generated seeds, and five examples byte-identical at 1920x1200.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`Px` and `PxVec2` reach the last places a pixel was a float: the window, the
box a widget reads, the box it is compared against, and `PixelRegion`. A
pointer, a wheel notch and a shaped glyph advance still arrive as floats,
and each is put on the grid where it arrives.
`Holds` is an interval of `Px`. `HOLDS_EPSILON_PX` is gone with the
`exact`/tolerant split it existed for: `at` is the length a widget read, an
open end is the next step along, and `same_px` is equality. `Span`'s margin
from `5ed9e87` goes too -- the box a parent hands back and the sum of what
its children asked for are counts of the same step, so the boundary decides
the same way from either side.
Three things had to be true for that, and were not:
`Holds::through` inverts `px + rel * box`, which rounds -- so a part of a
given length came from a range of boxes, and inverting the length alone gave
a point that need not contain the box the part was drawn in. It now maps the
half step either side, and one more for a length composed down the chain
against the same length measured against the window.
`RegionRemap` translates when a box only moved, rather than dividing to find
each part's fraction and multiplying to place it again. Two roundings landed
a step from where growing the tree that way does; a move is exact on a grid,
which is the whole reason `tests/drift.rs` was written.
A pixel is `1/1024` rather than `1/64`. At `1/64` the residue of a length
reached two ways was one step, and one step was 0.016 px -- enough to move
a box. `PX_SHIFT` and `REL_SHIFT` are the only statement of the grid now,
and the shader's copy is prepended from them rather than written twice.
Checked: fmt, clippy, 102 tests, 100 generated seeds in 75 s, all five
shrinker cases at 300 seeds, and `tabs`, `view`, `minimal`, `text` and
`random` byte-identical at 1920x1200.
What the fuzzers ask for is now a step, not a twentieth of a pixel: the
shrinker's five cases agree within one (`resize` exactly), and the oracle's
two-operation cases within two. The residue is a single rounding either way
-- it scales with the grid rather than accumulating, which is why it is a
thousandth of a pixel now. Closing it means one way of asking how long a box
is, rather than a chain composed down and a length measured against the
window; that is a bigger change than this one.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`Len` is `Px` beside `Rel` beside `Weight`, so the seam `4e28f10` left in
`Span` -- a float length added to a fixed-point cursor -- is gone, and the
sum a span compares against its box is exact.
`Weight` is its own scale, `Fixed<16>`, because a share of what is left over
is not a fraction of anything: a list divides its room by the total of them,
so the range has to hold a whole list's worth while the precision only has to
tell two weights apart. `Rel::ratio` turns two weights into a share on the
finer grid, which is what a span needs and what dividing them on their own
grid would round away.
`AxisAlign` holds a `Rel` rather than a float, which is what the layout was
reading out of it anyway. `Padding` and `Span::gap` hold `Px`, converted
where they are built instead of on every frame. `RegionAlign::rel` is gone;
its one caller wanted a position, and now builds one.
`Fixed` gains `from_num` for a number as it is written in source, `mul_int`
for a length repeated a whole number of times, and `ratio`.
Checked: fmt, clippy, 101 tests, 100 generated seeds in 86 s, all five
shrinker cases at 300 seeds, and all five examples byte-identical at
1920x1200 against `4e28f10`.
With the fuzzer comparing for equality rather than within 0.05 px, four of
the five cases now pass 100 seeds -- `resize-repaint` joins the other three.
`reorder` still fails one seed by one step, so the last of it is in what a
box is measured *in*: `px_len` and the window are still floats.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`UiScalar` is `Rel` beside `Px` rather than two floats, so composing a
position down a chain of boxes adds exactly and rounds only at the two
multiplies `within` makes. `UiSpan`, `UiRegion` and `UiVec2` follow it, the
hand-written `Hash` goes away with the bits it hashed, and `impl_op!` grows a
`same` form for a type whose fields are not the same kind of number.
`Len` is still floats, so the seam converts: `Px::from_f32` where a span adds
a child's length to its cursor, and `to_f32` where something outside layout
wants pixels. Those go when `Len` follows.
The GPU reads what the CPU wrote: the instance attributes are `Sint32x2` and
the shader decodes by `1/64` and `1/2^24`, both exact in `f32`, then composes
the move chain in floats as before. It has to agree with itself frame to
frame rather than with the CPU to the last bit.
Two things fell out of making the numbers exact.
`floor` at the rasteriser was picking the pixel below wherever a fraction
divided a window exactly. A fifth of 1920 is 383.99998 through a rounded
`Rel` -- and was 384.0 through an `f32` that happened to round up -- so five
tabs each lost their last column. `snap_floor` takes a coordinate within half
a step of a boundary to be on it, which is the same rule as everywhere else
here: decide where values do not land.
A widget measured on one layer and drawn again on another kept the first
layer, because `try_reuse` compared everything about a retained drawing
except which list it sits in. `Stack` does exactly that for its background,
so every panel's text went under its own background. It only worked before
because the two asks differed by a rounding and forced a redraw;
`tests/retained.rs` pins it now, and `ReuseOutcome` can say `WrongLayer`.
Checked: fmt, clippy, 100 tests, 100 generated seeds in 70 s, all five
shrinker cases at 300 seeds. `tabs`, `view` and `minimal` render
byte-identical at 1920x1200; `random` differs in 36 pixels by one level;
`text` differs where glyph origins moved onto the grid -- same positions,
same spacing, different subpixel coverage, checked at 6x against the old
render.
Measured on the way: with the fuzzer comparing for *equality* rather than
within 0.05 px, `resize`, `repaint` and `size-change` already pass 100 seeds.
`reorder` fails one seed by exactly one step, which is the `Len` seam above.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`.width()` built a `SetSize` whose whole job was to answer `size_hint`, so
every declared length cost a widget, an `ActiveData` and a link of chain to
say one number. It is now a `SizeRule` per axis on `WidgetData`, beside
`region_node`, resolved by `Painter` where the widget is drawn. `SetSize`
and `MaxSize` are gone; `MaxSize` had no caller but its own builders.
That settles which of two answers is the size. A rule wins on the axis it
names and the `Size` returned by `draw` answers the rest, applied once in
`draw_inner` rather than by each widget that could carry one -- so the
widget under a rule never learns of it. `Painter::size_hint` reads the rule
first for the same reason: a rule that beats what a widget would draw has
to beat what it says about itself.
`declared_lens` still falls back to a non-leftover `size_hint`, which is
how an image or a gap gets its own pixel size rather than the whole offer.
That is the offer's business rather than a declaration's, and it falls away
when a widget occupies its reported size inside the box it was offered.
`known` and `declared` are separate because a share is a length to whoever
divides one and not to whoever composes a box: `.width(leftover(3))` is
known without drawing but cannot narrow anything.
Checked: fmt, clippy, 85 tests, and 100 generated seeds agreeing warm
against cold in 67.6 s. `minimal`, `text` and `view` render byte-identical
at 1920x1200; `tabs` differs only in the widget count it prints about
itself, which is two wrapper types smaller.
The length kind that asks for a part of what is left once the fixed
lengths are taken is called leftover: Len::leftover(2), Len::LEFTOVER,
Size::LEFTOVER, Len::leftover the field, and apply_leftover. It says
what it is where "rest" reads as "the remainder of the list" as often as
"the remaining space", and every agent who has touched this has reached
for a third word for it.
Locals called rest that meant a region or a widget are renamed with it,
since the word now names something else.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
SetSize took its declared length out of UiRegion::FULL, which is the box
it was already given, so a span that had sized that box from the same
hint had the fraction taken twice: .width(rel(0.5)) in a 400-wide span
drew its child 100 wide. It held under a Pad or the root, which do not
honour a hint, and hid under px, where 200 of a 200-wide box is all of
it. The text example was 111,923 pixels from upstream/main because of
it.
Whoever draws a widget now takes its declared length, in its own box,
which is what a fraction of one means, and is the identity for a caller
that already reserved the space. rest is not taken: a share of what is
left over is only a length to the widget dividing one, so it passes up
in the size as it does out of a span. SetSize keeps only what it
declares.
A declared length is then part of the box its parent decided, so
changing one has to redraw the parent; the lengths resolved into a box
are kept beside it and compared. Assuming instead that any dirty widget
which declares a length needs its parent costs 17% of a frame that
dirties 130 of 260 widgets, and buys nothing.
All five reference renders, the resize render and the image replay are
byte-identical to upstream/main, the 100-seed sweep passes, and the
resize fixture is 1.286 ms against 1.289 before.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A local redraw drew a dirty widget in the box it was placed in. When a reader
decided that box from the widget's own answer -- an aligned span sized to its
children, a text at the tail of a row, a scroll's content -- the old answer is a
fixed point of measuring there whatever the content now says, so the layout had
two stable answers and which one it reached depended on the tree's history.
`tests/unsettled.rs` has the two shrunk cases: the four-widget aligned span,
and a scroll placing a pass-through `SetSize` in a box the content decided,
where the span under it was placed once and nothing at its own edge said so.
`ActiveData::offered_px` keeps the pixel size of the box the parent first asked
about the child in, whether through `known_len` or a first `place`, beside `px`,
the box it drew against. A dirty widget whose size reads an axis on which some
reader up its chain gave what it read a box other than the one it asked in is
not drawn locally: the chain is marked and the parent of the highest such
placement draws, since above it every box is a constraint rather than an
answer. The walk goes up the whole reader chain because a pass-through hands a
derived box down unchanged.
`Scroll` read its box's length for the clamp through `px_len`, which records
the reported size as depending on it, and it does not: its size is its
content's. That made every scroll tick a size question asked in a derived box,
at 34x the instructions. `Painter::px_len_for_draw` is the read that records
nothing. Instructions per frame on the depth-8 rig against the previous head:
`many` at 32 dirty 0.66M to 0.74M, at 130 dirty 27.7M to 26.5M, `resize` 15.8M
to 15.0M, `scroll`, `repaint` and `size` unchanged. The shrinking fuzzer passes
200 trees at depth 7 in all four cases, the hundred-seed sweep passes, and the
five reference renders and the resize render are byte-identical.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A resize had its own mechanism: `reads_output` recorded that a widget had
looked at the output, `update` scanned every active widget for one whose
`output_px` had moved, marked it and its whole reader chain, and
`resize_marks` kept those marks from counting as content dirtiness --
while `on_resize` answered the same question for every other box. Two
answers to "does this drawing survive its box changing length", and the
one that applied to the window ignored what the widget had declared.
With the output held as the root of the chain there is one question. A
resize offers the root widget its box again, `try_reuse` answers per axis
from `on_resize`, and `redraws_under` prices the subtree. Gone with it:
`reads_output`, `resized`, `resize_marks`, the scan, the eager reader
marking, and the shallowest-first branch in `redraw_updates`, which only
existed because resize marking worked differently -- the settle loop now
has one order.
Two things this needed. An unslotted widget may be reused when only its
parent's box changed length: it has nothing of its own to write, and what
it drew is a fraction of that box, so the slot above it already carries
the change. And `root_readers` holds the widgets whose size came from the
output rather than their own box -- `MaxSize` -- since no box of theirs
need have changed; they are marked per axis, from a set kept as they draw
rather than by scanning.
`a_resize_does_not_redraw_what_the_shader_can_move` now says `Scale`,
which is what it was always describing, and `a_resize_redraws_what_does
_not_scale` is its other half. `ReadsWidth` declares `Scale` across the
axis it does not read, so per-axis precision comes from the widget rather
than from which output axis it happened to touch.
Resize phase, seed 1 depth 8: 6.45M instructions per frame to 5.84M.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A position was composed up the slot chain to a normalized region and then
multiplied by the output's size, so the window was the one box in the
system that was not a box. Seeding the chain with a root slot holding it
in pixels makes composing through it leave everything below in pixels,
which is what the multiplication was doing.
`within` already does the arithmetic: a child at `rel` 1 inside a span of
`px` 0 to `px` 1920 composes to `px` 1920 and `rel` 0, so the trailing
`to_px` becomes the identity rather than a step. The shader walks the
same chain and needs no change for the same reason.
This is the shape the resize machinery wants before it can be deleted: a
resize becomes one slot written, which `try_reuse` and `redraws_under`
already carry. Nothing is removed yet.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`dp` is coming, and then `abs` says which of the two it is not. The
component has always been a pixel count, so the name that admits it is
the one that leaves room for a second unit beside it.
Mechanical: the field on `Len` and `UiScalar`, their constructors,
`to_abs`/`get_abs`, the matching WGSL struct member and the locals
composing it. Field order and types are unchanged, so the `Pod` layout
the shader reads is the same bytes. `f32::abs` is untouched.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Choosing which dirty widget to settle next asked every one of them how
deep it was, and answering meant walking its ancestry to the root. At
130 of 260 widgets dirty that was 25.8% of the frame -- more than laying
out or rendering.
A widget's depth is known where it is drawn: its parent's plus one. So
`Painter` carries it and `ActiveData` keeps it, and the choice reads a
field. Being reused counts as being visited, so the two reuse paths keep
it current too; only a subtree nothing looked at can hold an old one,
and nothing under an unvisited subtree is being ordered.
The order is unchanged, so nothing about the layout is: the five
reference renders and the resize render are byte-identical. What the
carried depth might get wrong is itself, so `depth` asserts it against
the ancestry in debug builds, and the hundred-seed sweep passes with
those assertions on -- including the reshuffles, which are what move a
widget to another parent.
Same load, 1000 frames, 130 of 260 dirty: 8.16M instructions per frame
to 7.14M, median 0.813 ms to 0.639, and the choosing from 25.8% of the
frame to 4.7%. What is left of it is iterating the dirty set itself,
which a `HashSet` walks by capacity rather than by length.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`try_reuse` asks whether the widget in front of it is dirty and, if not,
hands its parent the size it last reported. Nothing asks whether a dirty
widget sits under it through the size dependencies -- which is the check
`retained_size` makes, for exactly this reason, on the path that does not
draw.
What covers the gap is the order `redraw_updates` settles in: taking the
deepest dirty widget first means that by the time a reader draws, what it
reads has already drawn and propagated. Drawing in any other order
returns a stale size. Measured rather than reasoned: picking whatever the
dirty set yields first fails seed 2 of `tests/generated.rs` with 24
widgets wrong, a subtree keeping a 317 px width where a cold tree has
147, and the traces are identical until a `Span` reports 317 against 147
from the same child sizes -- it had reused a subtree holding a `SetSize`
whose declared width had changed.
So the coupling is real and was written down nowhere. Say it in both
places, since a reader of either would otherwise conclude the order is
about cost.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A container measures a child by drawing it in a box it may not keep, so
one layout asks a text for a dozen widths and comes back to widths it
has already had -- the hottest text in the depth-8 tree draws 32 times.
Each ask re-ran the shaper, because the two caches in front of it held
one entry each and a trial width alternating with a final width evicts
the answer about to be wanted again. `perf record` put 63% of a resize
frame in text and 0.9% in `draw_inner`.
So keep more than one: a bounded store of shapings on `TextData`, keyed
by the text, the attrs and the width, holding the parley layout and the
glyphs placed from it. Bounding the store rather than each buffer is
what keeps it a fixed cost -- +4 MB on a tree of 4,000 texts, which is
19 MB less than the code before #16 holds after the same resizes.
`TextBuffer` now holds the glyphs of the shaping it is drawn as, which
is where `TextView::tex` was. That leaves one place to invalidate rather
than two, so the `MutDetect` flags on a view's text and attrs have no
reader and go, along with the `buf.changed = true` after every edit.
On a 40-row tree of distinct random paragraphs, 500 resize frames:
124.2M instructions per frame before, 17.7M after, and 45.9M when the
width never repeats. The five reference renders and the resize render
are byte-identical, and the 100-seed sweep passes.
`tests/revision_cost.rs` is that tree, written in the API subset
`43ce8c7` shares so the same source measures the code this replaced.
Report the worst frame and p99 beside the median, since a stutter is
what somebody sees. Count glyph placements, and count a text render per
ask rather than per shaping, so the store cannot hide how many times a
layout drew the same text.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Reading this back, three things claim something they do not do.
`OnResize::Translate` is returned by `TextView::on_resize` under a
comment weighing anchored glyphs against reshaping ones, but nothing
consumes it: `try_reuse` asks only whether the answer is `Scale`, so a
widget saying `Translate` is redrawn. Say so on the variant, since the
comment beside it reads as a description of behaviour.
`depend_on_size(child, false)` and `depend_on_size(child, true)` are the
difference between a hint, which is context-free, and a size the child
produced by drawing, which carries every pixel axis the child read. That
is the subtlest rule in the file and it was spelled as a bool; give the
two cases their names.
`draw_started` is the record of what has drawn during the pass under
way, and it worked only because `redraw` removes an id before asking
about it -- nothing emptied the set, so it accumulated the id of every
widget ever drawn, including ones long gone. Empty it with the pass.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Two holes the random trees found, both of which kept a wrapping text shaped
for a width it no longer had.
**A region is a fraction of a slot's box, so an unchanged region is not an
unchanged box.** `try_reuse` compared regions, and a child drawn at
`UiRegion::FULL` of a slot whose box had just halved compared equal to
itself and was reused without being descended into. `ActiveData` now keeps
the pixel size of the box it drew against and the comparison is against
that, which is the question that was being asked all along and is right
through a slot change and an output resize alike.
**A size the parent learnt by drawing the child is an answer for that box
only.** The walk looking for what cannot survive a length change skipped a
child whose own box was a fixed width -- correctly, its box does not change
-- but that width was what the child reported when the span drew it in the
span's box, and the span's box did change. So a child whose size the widget
read is redrawn unless it declares an exact `size_hint` for the changed
axis, which is the one case the parent did not have to draw it to know.
The cost is that a size-reading container gives up its reuse when its box
changes length, which is every span, so `OnResize::Scale` now earns its
keep on moves and on subtrees whose sizes nobody read rather than on every
stretch. Correct first; `replace_cost` still measures the case the chain was
built for.
`tests/generated.rs` is what found both and what says they are fixed: 90 of
90 warm trees now land where a cold build does, against 83 before this
commit and 83 on `db1751f`. The ignored sweep agrees over 300 checks on 100
seeds.
`a_fixed_length_child_is_not_redrawn_when_the_box_around_it_grows` became
`a_declared_length_...`: the child now says its width, since a width the
span measured is not one it may keep.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`iris::random` grows a seeded tree -- spans in every direction, stacks,
rects with varying opacity, text both wrapping and overflowing, a declared
size over half of it -- and `tests/generated.rs` grows each seed twice: once
and then mutated, once with the mutation built in. Every widget's box has to
match. `examples/random.rs` draws one, and `IRIS_SEED`/`IRIS_DEPTH` pick it.
It found the defect in the commit before this one immediately: a reuse that
marked a descendant for redraw escalated to that descendant's size reader,
which re-placed the child, which marked it again. `try_reuse` now asks
whether anything under the widget would have to be drawn again *before*
keeping the drawing, and drops the whole thing if so, which terminates
because it adds no marks.
It also found one older and larger than this branch, which
`a_wrapping_child_of_a_row_settles_somewhere_else_each_time` reproduces and
documents: a wrapping text on a span's own axis is shaped twice against two
different widths, so where it settles depends on how many passes it has had.
7 of 90 cases diverge on `db1751f` and 30 do here, because a placed child
reaches the second shaping more often. It is the same defect either way, and
it belongs where the two draws meet -- LAYOUT.md §4 -- not in the chain. The
six seeds the live tests use are ones that agree.
`forget_ref` goes with the subtree rewrite that used it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A widget's region is now held in the coordinates of the slot it draws in
rather than the window's, and `Painter::place` is how a container asks for a
slot: it draws a child it decides the box of and may decide again. Everything
under that slot is a fraction of its box, so placing the child a second time
is one entry to write whether it moved or changed length. A child drawn any
other way has no slot and shares its nearest ancestor's.
That is what keeps the chain short. `chain_cost` measured depth as the cost
-- free to 8, +42.6% at 16 -- and a slot per widget put a transcript's glyphs
past that for nothing, since almost every slot was zero. `Span`, `Aligned`
and `Scroll` are the containers that re-place a child after drawing it, and
`tests/layout.rs` pins that four widgets between a span and a leaf leave the
leaf's chain one deep.
`UiRegion::stretch`, `UiRegion::stretchable` and `UiScalar::stretch` are
gone. Nothing is inverted any more: a box that changed length is written to
its slot, and the descendants recompose against it in the shader. That also
retires the case the guard existed for, where a fixed length has no fraction
to recover -- `tests/layout.rs` now stretches a 40-tall row on its other
axis, which `stretchable` refused outright.
What still walks the CPU is deciding who must draw again, which no chain can
answer: `mark_resized` descends from the widget whose box changed and marks
anything whose own box changed length and whose drawing reads it. A part of
a box with no relative extent on an axis is a fixed length, and composing
into it leaves none either, so the walk stops where a length did not change
-- an 80-wide child in a widened row is not redrawn though it says `Redraw`.
`Span`, `Pad`, `Stack`, `Offset`, `Aligned`, `SetSize` and `LayerOffset` say
`Scale`: each places in fractions and offsets of its own box and none reads
the box's pixel length. `Scroll` and `MaxSize` do read pixels and stay
`Redraw`.
45 tests pass, five of them new. Render verification comes after the CPU
side, per the owner.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A slot now holds the box its contents are placed within, in the coordinates
of the slot it names, and `prelude.wgsl` composes the chain with `within`
instead of adding a delta. A translation is the special case where the box
has its parent's relative extent, so every caller passes
`UiRegion::FULL.offset(delta)` and nothing changes on screen yet: 42 tests
pass and `tabs` at 1920x1200 is byte-identical.
`Moves::resolve` takes the region to compose rather than returning a sum, so
the CPU walk is the same operation the shader performs.
Measured against the translate slot on the same binary with
`tests/chain_cost.rs`, 200k instances: +0.6% at depth 1, +0.5% at 2, +0.8% at
4, then +9.6% at 8 and +32.2% at 64. Free at the depth opt-in slots produce,
which is the next commit; the per-level cost was always the dependent load
rather than the arithmetic.
The identity is `UiRegion::FULL` rather than zero, which `MoveOffset`'s
comment says beside the `Zeroable` that `Pod` requires: a zeroed entry is a
box of no extent and collapses its subtree to a point.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`Remap` existed to invert a composition, and a translation never needed
one: shifting a box shifts everything composed into it by the same
amount, because `lerp(s + d, e + d, t) == lerp(s, e, t) + d` on both
channels. That holds whether or not the box has a relative extent, so
the carry branch was answering a question it did not have to ask.
So the decision is made once, before the walk, and neither relocation
method branches. A translation is already one slot write. A change of
length calls `UiRegion::stretch`, which re-expresses each part at its
own fraction of the new box and needs `stretchable` -- a fixed length
holds its parts as offsets from its start and keeps no fraction to
stretch by.
`Remap`, `UiScalar::outside`, `UiSpan::outside` and `LerpUtil::lerp_inv`
are all gone with it. Nothing inverts a lerp any more: the one division
is done against a denominator `stretchable` already established is not
zero.
What it gives up is the per-axis carry, so a box that changed length on
one axis and not the other is redrawn where it used to be remapped.
Counted: six of `tabs`'s fourteen relocations and five of `text`'s
sixteen, and one extra redraw per frame on `replace_cost`'s 200 rows --
354,310,889 instructions against 354,272,387, which is noise.
Checked: fmt, clippy and 42 tests. `tabs` (with the image replay),
`view`, `minimal` and `text` all still render byte-identical to
`upstream/main`.
`try_reuse`'s pure-translation case now writes the widget's move slot
instead of remapping every primitive in its subtree. Counted on a span
of 20 rows, each five primitives deep, when the row above them changes
height:
before 100 primitive region writes
now 0, and 20 slot writes -- one per row the span re-placed
`window_region` walks the same chain on the CPU, so hit testing and
anyone asking in window pixels see a widget where the shader draws it.
`Moves::resolve` stops at `CHAIN_LIMIT` like the shader, and asserts in
debug that it got to the end rather than running out.
Two things fall out of it. Rewriting a region is the one thing a slot
cannot express, so `mov` zeroes the slots of everything it rewrites: a
region is what its slot was a delta from. And `try_reuse` loses its
`old == region` shortcut, which was wrong once a slot exists -- a widget
offered exactly the box it drew against has to have its delta cleared,
not skipped.
`Moves` lives on `UiRenderState` rather than `UiData`, because the draw
is what produces it and `window_region` should not need the ui's
resources to answer where something is. The renderer already takes both.
A slot is retired in `remove_rec`, after the descendants whose slots
name it as their parent. Either order is correct here -- nothing can
claim a freed index while a subtree is coming down, since `on_undraw`
cannot reach the slots -- but this way `remove`'s `undraw` flag only
notifies rather than also deciding slot lifetime, and the retirement
sits beside the recursion it follows.
Checked: fmt, clippy and 41 tests. `tabs` (with the image replay),
`view`, `minimal` and `text` all still render byte-identical, and the
live sway resize round trip -- which re-places most of the tree at the
same size, so it is the slot path throughout -- matches a cold start at
each size.
The plumbing for O(1) subtree movement (LAYOUT.md §2), with every slot
still at zero, so this changes no pixels and the next commit can change
behaviour against a known-good picture.
Every active widget owns a slot in `UiData::moves`: a translation in
physical pixels and the slot it is relative to. A primitive instance and
a mask each name one, and `prelude.wgsl` walks the chain and adds the
accumulated delta. A mask resolves its own chain rather than the drawn
primitive's, so a stationary viewport can clip content that moves inside
it. `CHAIN_LIMIT` is stated on both sides; it bounds a malformed cycle
rather than any real tree.
A slot outlives any one `ActiveData`, because a redraw replaces that
while the widget's children go on pointing at the slot, so it lives in
`UiRenderState::moves` keyed by widget and is retired when the widget
stops being drawn. `MoveIdx` is its own type rather than another
`Id<u32>`: it sits beside `MaskIdx` in an instance and the two must not
be swappable.
`Vec2` is now `repr(align(8))`, which is WGSL's alignment for a
`vec2<f32>`, so a GPU struct holding one is laid out the way its shader
reads it without saying so itself -- `GlyphPrimitive` no longer states
its own alignment, and `MoveOffset` never has to. Both keep a manual
`unsafe impl Pod`, since the trailing padding that alignment introduces
is what `derive(Pod)` refuses. `WindowUniform` holds the `Vec2` its
shader has always called `dim` rather than two loose floats, which was
the last place the two sides described the same bytes differently.
Checked: fmt, clippy and 40 tests. `tabs` (with the image replay),
`view` and `minimal` render byte-identical to `upstream/main`, and
`text` is unchanged.
Small, and disjoint from #12 — this touches `task.rs`, `harness.rs` and `render_state.rs`, none of which #12 goes near.
`Tasks` held an `Arc<Window>` only to call `request_redraw` when a task finished, which made the task queue, and so `DefaultRsc`, impossible to build without a window. It now takes an `Arc<dyn WakeTaskQueue>`, and `Window` implements it.
Waking also moves from *the task ended* to *an update was sent*, which is when there is actually something for the host to apply. A task that keeps running after sending one no longer holds it until it finishes, and a task that sends none no longer asks for a frame nothing needs.
`iris::harness` is what that buys. `UiRenderState` already does layout, hit testing and primitive building with no surface, so a test can build a tree, run frames, move a pointer and read back where widgets landed. `tests/harness.rs` covers span layout, resize relayout, press routing, hover start and end, wheel scrolling with its clamp, and a task update reaching the tree. None of them could be written before, since the only way into layout was a window.
It does not draw. A claim about pixels still needs a real surface — I checked this one against the rig rather than asserting it: `examples/task` under headless sway, centre pixel `ff0000` before the click and `0000ff` after, so the windowed path still applies task updates under the new wake.
The only core change is `UiRenderState::output_size()`, so that a host reading back the size it set does not have to keep a second copy.
---------
Co-authored-by: iris <2+iris@noreply.localhost>
Reviewed-on: iris/iris#15
Reviewed-by: iris <2+iris@noreply.localhost>
Co-authored-by: AIris <4+iris-ai@noreply.localhost>
Replaces the bindless `binding_array<texture_2d<f32>>` the renderer bound every texture through. That array needs `VK_EXT_descriptor_indexing`, which a real share of Android GPUs lack, so the old shape did not run there at all.
The two things being bound want opposite treatment, so they are now split:
- **Glyph atlas pages become layers of one `texture_2d_array`.** A glyph primitive carries a `layer` instead of a view/sampler index pair. A layer index is an ordinary sampling operand, so this needs nothing beyond plain Vulkan 1.0 / GLES. Growing the atlas recreates the array with headroom and `copy_texture_to_texture`s the old layers across, no readback.
- **A standalone image gets its own texture and its own bind group,** and draws in its own call. It no longer needs a per-instance entry in `PrimitiveData`: the bind group has already picked the texture.
`Primitives` keeps images in a list of their own as a result, with `PrimitiveChange::is_image` naming which list a renumbering belongs to -- the two have independent index spaces, so `(layer, inst_idx)` alone would collide between them.
Two notes on judgement calls, since this slice was rebuilt on top of `main` rather than transplanted:
- The source version renamed `GlyphEntry::is_colored` to `is_color` and added a second `IS_COLOR` flag constant beside the existing `GlyphEntry::IS_COLORED`. Both dropped: #10's naming and its `flags()` are kept, and UVs stay `Vec2` rather than going back to `[f32; 2]`.
- `ImageGpu` no longer holds the `Texture` behind its view, which removes an `#[allow(dead_code)]`. A `TextureView` keeps its own reference to the texture, checked by rendering rather than assumed -- see below.
### Verification
```
cargo fmt --all --check
cargo clippy --workspace --all-targets --locked -- -D warnings
cargo test --workspace --locked
```
All clean; the 4 text-edit tests pass. The only clippy output is the pre-existing future-incompatibility notice about `naga`/`wgpu`/`winit`.
Because this is a rendering change, it was also run for real rather than only compiled. The `tabs` example was rendered on this machine's GPU -- Venus onto an RX 7900 XT, confirmed from the loaded ICD (`libvulkan_virtio.so` on `/dev/dri/renderD128`) rather than assumed, since a failed Vulkan init here silently falls back to llvmpipe and would make the screenshots meaningless.
Screenshots before and after the change are **byte-identical** (same md5) in two scenes: the default tab, which exercises text (the atlas path) and rects, and the image tab with a standalone image pushed at startup, which exercises the per-image bind group. The image-tab scene needed a temporary local edit to the example to push the image without a click; that edit is not part of this branch. The same comparison, re-run after dropping the `Texture` field, is still byte-identical -- which is the check that the view alone keeps it alive.
---------
Co-authored-by: iris <2+iris@noreply.localhost>
Reviewed-on: iris/iris#11
Reviewed-by: iris <2+iris@noreply.localhost>
Co-authored-by: AIris <4+iris-ai@noreply.localhost>
Replace the cosmic-text path with Parley layout and Swash rasterization, backed by shared glyph-atlas pages. Shaping, editing, rasterization, and glyph rendering move together because they share the text buffer and rendered-glyph types; splitting them further would require a temporary renderer that is immediately removed.
This is reconstructed rather than replayed from the extraction history. It also fixes issues found during review:
- texture binding changes remain set when an atlas patch follows a new page
- pressing an empty field places a caret and accepts input
- selection motion delegates collapse behavior to Parley
- character deletion follows logical clusters rather than visual neighbors
- the unused root-level Swash dependency is omitted
Four public-behavior integration tests live in `tests/text_edit.rs`: empty-field input, multibyte IME preedit replacement, UTF-8-safe backspace, and selection replacement. The old twelve-test inline block and implementation-restating cases are omitted.
Every added source comment was manually reviewed. Comments that narrated implementation or history were removed; retained comments document cache/rasterization keys, GPU upload constraints, focus representation, bidi geometry, or IME semantics.
Known limitation: atlas pages currently grow without eviction. Each page is 4 MiB on CPU and GPU. An arbitrary cap would leave cached rendered-text UVs pointing at reused glyph slots, so bounding this safely needs a later generation/invalidation change.
This changes public text types and signatures. GPU glyph rendering is covered by compilation rather than a live-surface test.
Verified with:
- `cargo fmt --all --check`
- `cargo clippy --workspace --all-targets -- -D warnings`
- `cargo test --workspace` (four integration tests pass)
Cargo still reports inherited future-incompatibility notices for existing wgpu/winit dependencies; there are no current clippy warnings.
---------
Co-authored-by: iris <2+iris@noreply.localhost>
Reviewed-on: iris/iris#10
Reviewed-by: iris <2+iris@noreply.localhost>
Co-authored-by: AIris <4+iris-ai@noreply.localhost>
`update` redrew everything when `resized` was set, but `needs_redraw` --
which is what decides whether to request a frame at all -- did not know
about `resized`. A condition in one and not the other is a frame nobody
asks for and a stale window. The two share one `needs_redraw_all` now.
Latent on Wayland, because winit requests a redraw after a resize by
itself; a resize changes neither the root nor any widget, so nothing else
here would have asked. It stops being latent on Android, where the
surface work will not have winit underneath it and every rotation and
keyboard open is a resize.
This is not a fix for the startup defect recorded in RUST.md, where the
window keeps its pre-configure layout: that reproduces with this change
in place, and the frame it needs is requested and drawn.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
iris-aiandClaude Opus 5
