#!/bin/sh
# Installs and controls ai-server as a user service, for Dev Updater to
# drive from the phone -- and for you to drive by hand, which is the same
# thing.
#
# Declared as the Server component of this checkout in `.dev-updater.ron`
# at the repository root, so the card drives it like any other project's.
# One button is worth knowing about before pressing it: on a phone that
# reaches ai-server through the tunnel rather than through Dev Updater,
# Stop leaves this server down until someone starts it again here.
#
#   ./service install | uninstall | start | stop | restart | status | logs
#
# `status` prints exactly one of `running`, `stopped`, `failed` or
# `not-installed`
# and exits 0. Anything else it prints, or any non-zero exit, means it
# could not tell -- which the card shows as "couldn't check" rather than
# as a service that is down.
#
# Nothing here ever prompts. Dev Updater runs this with stdin closed and no
# terminal, so a `sudo` password prompt would not fail, it would hang until
# the timeout with the card stuck mid-action. Anything needing root exits
# with a message telling you to run it yourself once instead.
#
# User services on purpose: a system unit needs root to install, and a
# build machine's own account is where a dev server belongs. Note that a
# user service stops at logout unless lingering is enabled
# (`loginctl enable-linger $USER`), which you want for this one: the phone
# reaches this server whether or not anyone is logged in at the desk.
set -eu

SCRIPT_DIR=$(cd "$(dirname "$0")" && pwd)
NAME=ai-server
BINARY="$SCRIPT_DIR/target/release/$NAME"

# Where this service's output goes, and the one generation kept behind it.
#
# Under $XDG_DATA_HOME rather than the checkout: a log is generated data,
# it outlives any one build, and the repository is shared with a machine
# that should not be able to read it. Rotated on start rather than by size
# or age, so what is kept is exactly "this run and the one before" -- which
# is the pair worth having after a crash and a restart, and is the reason
# the file is not simply appended to forever.
LOG_DIR="${XDG_DATA_HOME:-$HOME/.local/share}/$NAME"
LOG="$LOG_DIR/$NAME.log"
LOG_PREVIOUS="$LOG.1"

# Which init system is here, decided by asking rather than by looking for a
# binary: a machine can carry both, and an OpenRC older than 0.60 has
# rc-service but no --user at all.
detect() {
    if command -v systemctl >/dev/null 2>&1 &&
        systemctl --user show-environment >/dev/null 2>&1; then
        echo systemd
    elif command -v rc-service >/dev/null 2>&1 &&
        rc-service --user --help >/dev/null 2>&1; then
        echo openrc
    else
        echo none
    fi
}

MANAGER=$(detect)
if [ "$MANAGER" = none ]; then
    echo "No user-service manager here: this needs systemd with a user bus," >&2
    echo "or OpenRC 0.60+ (older ones have no --user). Run $NAME by hand." >&2
    exit 1
fi

# OpenRC keeps user-service state under XDG_RUNTIME_DIR and refuses without
# it. Worth saying plainly: from a server started outside a login session
# it can be unset, and the failure otherwise reads as a broken service
# rather than a missing variable.
if [ "$MANAGER" = openrc ] && [ -z "${XDG_RUNTIME_DIR:-}" ]; then
    echo "XDG_RUNTIME_DIR is unset, and OpenRC stores user-service state in it." >&2
    echo "Set it at login (elogind or pam_xdg) and try again." >&2
    exit 1
fi

SYSTEMD_UNIT="${XDG_CONFIG_HOME:-$HOME/.config}/systemd/user/$NAME.service"
OPENRC_UNIT="${XDG_CONFIG_HOME:-$HOME/.config}/rc/init.d/$NAME"

installed() {
    case "$MANAGER" in
        systemd) [ -f "$SYSTEMD_UNIT" ] ;;
        openrc) [ -f "$OPENRC_UNIT" ] ;;
    esac
}

# Whether the service fell over, as opposed to being stopped on purpose.
#
# OpenRC prints `crashed` *and* exits non-zero for this, so the word is
# read rather than the exit code -- leaning on the code would report
# "couldn't check", which is a different and less useful thing to say.
# The `running` check above stays on its exit code, which already worked
# and does not depend on wording.
crashed() {
    case "$MANAGER" in
        systemd) systemctl --user --quiet is-failed "$NAME" ;;
        openrc) rc-service --user "$NAME" status 2>/dev/null | grep -qw crashed ;;
    esac
}

require_binary() {
    [ -x "$BINARY" ] && return 0
    echo "No built server at $BINARY -- build it first." >&2
    exit 1
}

do_install() {
    require_binary
    mkdir -p "$LOG_DIR"
    case "$MANAGER" in
        systemd)
            mkdir -p "$(dirname "$SYSTEMD_UNIT")"
            cat > "$SYSTEMD_UNIT" <<UNIT
[Unit]
Description=$NAME (installed by $SCRIPT_DIR/service)

[Service]
ExecStart=$BINARY
Restart=on-failure
WorkingDirectory=$SCRIPT_DIR
# Appended rather than truncated: the unit is not the thing that decides
# when a log starts over, since the start subcommand rotates. Restarting
# inside one run (Restart=on-failure) then keeps the whole story rather
# than erasing the reason. Needs systemd 240+.
#
# No backticks in this heredoc: the delimiter is unquoted so that \$LOG
# expands, which means a backtick would run as command substitution while
# the unit is being written.
StandardOutput=append:$LOG
StandardError=append:$LOG

[Install]
WantedBy=default.target
UNIT
            systemctl --user daemon-reload
            systemctl --user enable "$NAME" >/dev/null
            ;;
        openrc)
            mkdir -p "$(dirname "$OPENRC_UNIT")"
            cat > "$OPENRC_UNIT" <<UNIT
#!/sbin/openrc-run
name="$NAME"
description="$NAME (installed by $SCRIPT_DIR/service)"
command="$BINARY"
command_background=true
directory="$SCRIPT_DIR"
pidfile="\${XDG_RUNTIME_DIR}/$NAME.pid"
# command_background discards output otherwise, which is why a crash left
# nothing to read.
output_log="$LOG"
error_log="$LOG"
UNIT
            chmod +x "$OPENRC_UNIT"
            rc-update --user add "$NAME" >/dev/null
            ;;
    esac
}

do_uninstall() {
    installed || return 0
    case "$MANAGER" in
        systemd)
            systemctl --user disable --now "$NAME" >/dev/null 2>&1 || true
            rm -f "$SYSTEMD_UNIT"
            systemctl --user daemon-reload
            ;;
        openrc)
            rc-service --user "$NAME" stop >/dev/null 2>&1 || true
            rc-update --user del "$NAME" >/dev/null 2>&1 || true
            rm -f "$OPENRC_UNIT"
            ;;
    esac
}

# Keeps the finished run and starts a fresh file for the next one.
rotate() {
    mkdir -p "$LOG_DIR"
    [ -f "$LOG" ] && mv -f "$LOG" "$LOG_PREVIOUS"
    : > "$LOG"
}

control() {
    installed || { echo "$NAME is not installed" >&2; exit 1; }
    case "$MANAGER" in
        systemd) systemctl --user "$1" "$NAME" ;;
        openrc) rc-service --user "$NAME" "$1" ;;
    esac
}

case "${1:-}" in
    install) do_install ;;
    uninstall) do_uninstall ;;
    start | restart)
        # Rotated before the manager is asked, so the file the service
        # opens is the new one.
        rotate
        control "$1"
        ;;
    stop) control stop ;;
    logs)
        # One path per line, newest first, and nothing else: the caller
        # wants somewhere to read from, not a formatted report. Printing
        # nothing at all is the answer for a service with no log yet,
        # which reads as "not supported here" and costs nobody anything.
        [ -f "$LOG" ] && echo "$LOG"
        [ -f "$LOG_PREVIOUS" ] && echo "$LOG_PREVIOUS"
        exit 0
        ;;
    status)
        if ! installed; then
            echo not-installed
        elif case "$MANAGER" in
            systemd) systemctl --user --quiet is-active "$NAME" ;;
            openrc) rc-service --user "$NAME" status >/dev/null 2>&1 ;;
        esac then
            echo running
        elif crashed; then
            # Before `stopped`, because a crashed service satisfies
            # neither of the other two and would otherwise be reported as
            # a state somebody chose.
            echo failed
        else
            echo stopped
        fi
        ;;
    *)
        echo "usage: $0 install|uninstall|start|stop|restart|status|logs" >&2
        exit 2
        ;;
esac