a802522039d713e96209effd446812031d36be79
9
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
  irisandClaude Opus 5
|
a802522039 |
Keep visited transcripts on the phone
Reopening a session downloaded the conversation again, every time, over the tunnel. It now draws from a copy of what the server has already sent and asks for one event to check that copy is still current. Per session, under cacheDir, the server's own event lines in chunks named for the range they cover -- so a coalesced page, whose lines do not say what they cover, still records it. Only the contiguous run ending at the newest chunk is served; a gap is closed by paging through it, bounded by `after` on /transcript so the page stops where the phone's copy starts and can therefore be kept. Nothing is derived and stored: rows are a rendering, and a cache of them would need throwing away on every change to the fold. Nothing here is load-bearing. Missing, evicted, damaged or unwritable all degrade to the cold open this screen did before, and the check before the stream resumes -- one request, one event -- is what stops a replaced or truncated file being spliced onto a copy of a different conversation. What that check cannot see, a line changed mid-file with the tail intact, is what Reload in session settings is for. Measured on the emulator against ui-sandbox, on a 505-event session: reopening it costs one request for one event, including scrolling the whole conversation back; a cold open is two requests and 100 events. A reset after falling 300 behind fetched the gap as four coalesced rows rather than re-fetching 104 events and discarding them. Every chunk was checked line by line against what the server says for the range its name claims, across the reset and the gap-fill. transcript-bench.sh, same viewport content and gestures, before and after: p50 16.9ms both, p90 25.6 -> 23.2ms, p99 33.5 -> 36.7ms, and the transcript's own draw accounting 0.33ms -> 0.32ms with place 0.31ms either way. Within the emulator's noise, which is what a cache must be: it changes what is fetched, not what is drawn. Building it also found that the server handed out the same transcript line two different ways. serde_json's default float parser is not correctly rounded, so a ts written as ...0757 came back from /transcript as ...0755 while the SSE stream sent the original -- invisible on screen, since a ts is drawn as a relative time, and visible here only because the cache compares a line it holds against the server's answer. Fixed with float_roundtrip, with a test that fails the moment it is dropped. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
irisandClaude Fable 5.1
|
801618ba0e |
Stream attachments end to end, ship files to a remote session's machine, and write up the transcript work
Uploads no longer sit whole in memory anywhere: the phone writes the multipart body chunked as it reads the picked file, and the server writes each chunk to a `.part` file under the session and renames it when whole. The per-request cap is 4 GB and bounds disk, not memory. A file attached to a session on another machine is copied there in the same request: one ssh invocation takes the bytes on stdin into the setup's `attachmentsDir` (new, optional, on the machine form and in the config), else the session's cwd, else the login home, and answers with `pwd -P`, which is recorded beside the file as `<name>.remote` and is the path the driver tells the CLI. A failed copy fails the upload and says why, so no message ever names a file that is not there. The host keeps its copy so transcripts can reference and fetch it. Measured against the Gentoo test guest: a 40 MB file shared from the phone arrived there byte for byte. The tilde in that setting is the remote home, so it is not expanded on the server the way other setup paths are. TRANSCRIPT_RENDERING.md records the week of transcript work -- the measurements behind each decision, the harness, what was rejected, and what to do next -- so a new session can start from it. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
irisandClaude Fable 5.1
|
6180663f14 |
Attach any file, take shares from other apps, and survive a backwards highlight
Attachments were images only. Now any file can be attached: from the file chooser behind the "+" menu, or from Android's share sheet, which the app is now in. An image still goes to the model as a picture; anything else is stored under its own name (`<hex>-<name>`, cleaned by `safe_file_name`) and the Claude driver ends the message with `Attached file: /abs/path`, since the CLI reads files by path and a model cannot be shown a trace. The user-message field is renamed `images` -> `attachments` on both sides, with a serde alias reading the rows written before. A share arrives before anyone has said which session it is for, so it is held in AppRoot with a banner on the list until a session takes it; an open session takes it at once. Unreadable shares are reported beside the composer, not thrown. The tool card crashed the app when opened on a command holding a quoted glob such as `-path '*/.git/*'`: highlights 1.1.0's shell lexer answers `x '*/a/*'` with a span whose end is before its start, and AnnotatedString refuses the range. Such spans are dropped; the library is the place for the fix. The echo driver gains `/bash <command>` so a card with a given command can be produced on the emulator. ui-sandbox.sh's token salvage read the tokens block's close only at a line start, ran past the compact `),],` the server writes, and copied `setups` into the new config twice, which the server then refused. Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com> |
||
|
irisandClaude Fable 5
|
63c0bb9e4a |
Page history by rows, coalescing a reply's deltas server-side
The scroll-up freeze-then-skip was the history pager fighting the transcript's own storage. A streamed reply is stored one token per event -- hundreds of AssistantText events for one message -- but a page was counted in events, so on a delta-heavy conversation a page was a fraction of one row: the opening 80-event load was less than a screen, "scroll up a bit" hit the unloaded boundary at once, and each page the client did fetch cost a 400-event fold (hundreds of thousands of list copies) that landed as one jarring insertion. The server now joins each run of consecutive AssistantText deltas into the one event the client's fold makes of it, and counts a page's limit in these coalesced rows -- so a page is a page of the screen whatever the delta density. Measured against a 3,500-event / 100-row echo session on the emulator: a raw limit-20 page returns 20 tokens of one reply; the coalesced limit-20 returns five whole replies. Scrolling the whole thing showed waited p99 51.7ms -> 0.6ms and the worst whole-transcript measure 59ms -> ~0, with the client folding ~100 row-events instead of 3,500 token-events. No duplicate keys; the first reply still reconstructs whole from token zero, so healSplitMessage welds the raw newest window to the coalesced older pages exactly as before. Coalescing is opt-in per request (`?coalesce=true`) and applied only to older pages (`before` set): the newest window keeps real seqs because the live stream resumes from the newest seq the phone applied, and a coalesced newest event would hide the deltas after its first seq and replay them. The anchor-restore path also stays raw -- it counts events to reach a known seq, which a page measured in rows cannot do -- so HISTORY_PAGE is now rows while the restore span and its cushion stay in events. Also: ui-sandbox.sh gains a `keep` verb that restarts the server without wiping sessions, so a fixture that costs minutes to build (a long delta-heavy transcript) survives a server rebuild. Co-Authored-By: Claude Fable 5 <noreply@anthropic.com> |
||
|
iris
|
deb908034c |
Move a session to another working directory
`POST /sessions/{id}/cwd`, behind a field in the session settings dialog. A
working directory is settled when the process is spawned -- the CLI is
launched with it as its cwd and there is no control request that changes one
-- so this records the new one and ends the process that is in the old one.
It does not start a replacement, and the field says so in a line beside it:
a session with no process starts on the next message or on Start, which is
this app's rule for that everywhere else, and "usually restarts" is a worse
control than "always stops".
The path is checked against the session's own machine and refused if it is
not there. The spawn path corrects instead of refusing, because it is
resuming a directory the *machine* recorded and that can be gone through
nobody's fault; a path somebody has just typed is different, and a mistyped
one accepted here would surface much later as a session that would not
start, with nothing pointing at the typo. The refusal names the machine and
the path, and is drawn under the field it is about.
Nothing of Claude Code's own is moved, and that is measured rather than
assumed: on CLI 2.1.237, `claude --resume <id>` finds a session from any
working directory -- an id that does not exist answers "No conversation
found with session ID", and a real one resumed from an unrelated directory
did not. So the conversation continues in the new place with nothing
relocated. Doing otherwise would mean reproducing a rule this app cannot
see the whole of; PLAN.md records what that rule is, for whoever tries.
Found while checking it: `SessionInfo.cwd` came from the snapshot a session
launched with, so a moved session went on reporting its *old* directory for
as long as its process lived -- a dialog showing a directory the next launch
would not use, with nothing saying so. It is read from the config where the
row is built now, the same way `setup_name` already was, and for the reason
already written above `setup_name`: only the manager holds the config, and
both of these change under a running session.
Checked end to end on the emulator against a session whose process really
does take a cwd: /proc said /tmp/cwd-a before and /tmp/cwd-b after, the
dialog showed the new path immediately rather than after a restart, and a
directory that is not there and a relative path were both refused with the
session left exactly as it was.
|
||
|
iris
|
82401cd887 |
Select any of the transcript, and take a queued message back
Two things a reader could not do to what is on screen.
**Selection.** Nothing in the transcript was selectable at all, so a
command, a path or an error message could be read and not copied. One
`SelectionContainer` around the whole list rather than one per row: a
transcript is one body of text to a reader, and a selection has to be able
to run from a reply into the tool output under it. Per row it also could
not, and whatever was drawn without a container would have been silently
unselectable -- a state nothing on screen reports. Rows keep their tap
handlers; checked on the emulator that expanding a tool call, scrolling and
flinging are all unaffected, since a selection is a long press.
**Taking a message back.** A message sent into a running turn sits as a
bubble waiting to be read, and there was no way to change your mind: it is
tappable now, and the server answers `POST /sessions/{id}/unqueue`.
The answer has three states, and the middle one is the point. Claude's
driver writes a steer into the CLI's stdin the instant it arrives -- that
is what makes it reach the model at the next tool boundary rather than at
the end of the turn, and it was measured -- so the line is already gone and
`AlreadySent` is the only honest answer it can give. Holding the write
until a boundary would make the drop real and cost a steer one model call,
which is the latency the immediate write exists to remove; rejected on that
trade, with the reasoning in PLAN.md. The refusal is drawn on the bubble
that was pressed rather than in the error row under the header, a screen
away from it.
Where a driver really does hold its queue -- echo today -- the message goes
for good, and it goes as an `Event::MessageDropped` rather than as a return
value: every device watching the session loses the bubble, and a phone that
reconnects and replays the `messageQueued` does not put back one that was
cancelled with nothing left to resolve it.
|
||
|
irisandClaude Opus 5
|
778b2e3b04 |
Wrap table cells instead of cutting them off, and hand a batch over in one request
The renderer draws every table cell at one line with an ellipsis, so most
of a table was unreadable on a phone -- and an elided cell looks exactly
like a short one, so nothing said anything had been cut. Cells now take as
many lines as they need and align to the top of the row. Width is the other
half: a column narrows to 136dp and no further, and past that the table
scrolls sideways rather than squeezing. 136 is the widest floor that still
fits three columns across a phone, measured rather than picked; four and up
scroll, which is the right answer for genuinely too many columns.
The import screen used to send one request per selected row, so a handover
was only as atomic as the network: some rows started and the rest were
never asked for, and a row nobody asked for looks exactly like a row nobody
picked. `POST /setups/{id}/importable/delete` and `.../import` now take the
whole list, and every id is registered as in flight before the 202 goes
back. Only the registering is atomic -- the work settles per row, since six
deletes that all roll back together is not something a filesystem offers.
The echo driver grows `/table N`, with cells long enough to have been
truncated: a fixture of tidy one-word values renders fine whether or not
the bug is there.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
iris
|
3c159fa1e1 |
Run imports and deletes on the server, and say so on an event
Leaving the import screen used to cancel the batch it had started: the
request was the work, so the coroutine that owned it died with the screen
and coming back showed no sign anything had happened. A half-imported
session is the expensive kind of missing -- the row is back looking
untouched, and taking it again is the second `--resume` the import path
exists to prevent.
So the work runs on the server now. Delete and a new per-session import both
answer 202 and spawn the work, and `session::pending` is the record of it:
what is running, and how the last attempt failed. The phone reads that two
ways and needs both. Every row of the listing carries `pending` and `error`,
which is what a phone that was asleep, out of range or freshly opened has to
go on; `GET /setups/{id}/importable/events` streams the changes, which is
what makes a screen somebody is watching change by itself.
Neither alone is enough, and that is not theoretical. A broadcast has no
memory, so an operation that started and finished while the stream was still
connecting was one nothing would ever be said about -- with responses held
back far enough to make it visible, one row of a pair of deletes cleared and
the other sat on "waiting" for good. The screen now asks again after a
handover when anything still looks outstanding, and takes its row states
from that answer rather than from what it remembers.
The single tap still waits, because "take me to it" needs the session that
was made and 202 does not carry one. Both paths go through the same `spawn`
so they cannot drift about what importing means.
Resolving one importable session no longer lists every one of them:
`import::find` is the same script with one glob narrower, which takes the
import seed off the 3.7-second full scan that `delete` came off earlier.
The SSE connection and its framing are now `Sse`, shared with the session
transcript stream rather than written a second time.
|
||
|
iris
|
b172c464ea |
ai-app: a phone interface to Claude Code and llama.cpp sessions
A Rust backend that owns the sessions and an Android app that reads them. The server spawns and adopts CLI processes, normalises everything they emit into one event model, keeps the transcript, and serves it over pinned TLS on a WireGuard interface; the phone streams that, replies, sends images, and imports conversations the machine already has. `AGENTS.md` is the working guide -- what runs where, what has been measured, and the faults that were expensive to find. `PLAN.md` is the design record. History before this point was squashed away. It was a personal project's running commentary and carried a name and a couple of machine paths that have no business in a public repository; the tree is what mattered and the tree is here. |