Off by default and per session: it spends quota the moment quota exists,
with nobody watching, which is not a thing a default may decide. Switched
on from the session settings dialog, with the message it sends editable
("continue" unless something else is typed).
Running out of quota becomes a state rather than an error. The Claude
driver recognises its dialect's sentence -- `Claude AI usage limit
reached|1788546972` -- and reports `LimitReached` with the reset time it
gave; nothing above a driver matches on a string. The transcript draws it
as a divider, like a clear or a compaction.
The schedule is a plan to *ask*, never a plan to send. Both reset times
available are untrustworthy in the direction that matters -- the dialect's
is written when the turn fails, the endpoint's moves when the window does
-- so the wait ends in a question to the usage meter, and only `ok` with
no window at 100% sends anything. A window still spent reschedules to its
own reset time, which is what makes a limit that lifts late wait longer
and one that lifts early resume sooner. A meter that cannot be asked is a
longer wait too, never a send. A day after the limit was hit the wait
gives up and says so in the transcript, so a machine that can never be
asked is not retried for ever.
The schedule is persisted on the session: a five-hour window outlasts a
backend restart, and a wait forgotten across one never comes back.
Driven end to end with echo, never a real account: `/limit [minutes]`
reports the same event a real driver does and `/usage` sets what the meter
answers, deliberately separate so the two can disagree. The wait moved
from the dialect's two minutes to the meter's seven when the meter changed
its mind, and the message went out on the first check after the meter came
back under the limit.
Also makes the settings dialog scrollable, which these two controls made
necessary: at a 1.5x system font it clipped the last of them with nothing
on screen to say so.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The rate-limit bar answered a question about an account, and picked the
answer by machine. One machine runs echo, the Claude CLI and a local
model side by side, so every echo session on it drew the CLI's five-hour
window: a quota that session cannot spend and could never run down. A
session now names its meter (`usageProvider`, from
`DriverKind::usage_provider`, which `usage::providers_for` reads too so
the two lists cannot disagree), and the phone matches on machine *and*
provider. Nothing meters echo or llama, and nothing at all is drawn --
including while the first fetch is out, since "checking" under a session
that turns out to meter nothing is a row the screen then withdraws.
Echo gets a meter it can be *told* about instead: `/usage 42`,
`/usage 95 20`, `/usage 42 never`, `/usage notloggedin`,
`/usage unreachable`, `/usage failed`, `/usage off`. Those states cost
real quota to arrange, which is why none of them had been looked at.
And llama.cpp runs wherever a setup says, which was the last of phase 5.
`Transport::reserve_port` is the second half of what a transport is --
"run this" plus "reach this port" -- returning the port the server binds
there and the port that reaches it here, and `Launch::reaching` puts the
`-L` tunnel on the connection that already carries the command. Three
things that came out of building it:
- A forwarded launch gets a pty and every other one keeps `-T`. Killing
the ssh client ends a CLI by closing the stdin it reads; llama-server
never reads its stdin, so the same kill left it running on the far
machine with the model loaded -- one orphan per stopped session.
- The model is looked for on the machine that will serve it, at that
machine's own models directory, so `GET /setups/{id}/models` is what
the spawn screen offers rather than the backend's own downloads.
- The readiness poll watches the process, not only the port: a model
that will not load exits in a second and would otherwise have been
reported as "gave up after 300s". The failure carries the log's tail.
Exercised end to end against this VM over ssh to itself: spawn, load,
answer, outlive a backend restart, be adopted, answer again, and stop --
with both the ssh client and the far llama-server gone afterwards. The
local path, the Claude bar and the spawn screen checked on the emulator.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The markdown had accumulated a lot that was stale rather than wrong.
PLAN.md still described pi as the llama.cpp harness, a refcounted
LlamaServerManager, and a providers-by-hosts cross-product, all of which
were superseded or never built; it also carried a second copy of the HTTP
table that routes.rs owns. EXPLORER.md and TRANSCRIPT_CACHE.md held
implementation checklists for work that has since landed. AGENTS.md
restated most of PLAN.md's design instead of being the working-notes
layer it says it is. 3225 lines of markdown to 2180, with the stale
sections gone rather than reworded.
On the server, comments explaining what the code already says are out and
the ones recording a constraint, a measurement or an incident are kept but
cut to a few lines each: 5504 comment lines to 4586.
Four doc comments in session/mod.rs, and one each in process.rs and
usage.rs, had drifted onto the item above the one they describe --
functions were reordered without them, so `stop_session`'s doc sat on
`set_session_cwd`, `stat_of`'s on `struct Stat`, and `UsageMonitor`'s on
`type Cached`. Each is back on its own item.
routes.rs's module table also claimed later phases would add `/hosts`,
which setups replaced.
cargo test (127 passed), clippy --all-targets and fmt are clean.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The first half of EXPLORER.md: server/src/files.rs, which lists a
directory, reads a file, writes one, and creates a file or a directory on
whichever machine a setup names.
Each operation is one small POSIX script run through `Transport`, the way
the import listing and the usage fetch already ask a machine a question,
so the local and the ssh case are one implementation rather than two that
drift. The path crosses as a positional argument and never as script
text; `PATH_PRELUDE` is the one line that gives a leading `~` its
meaning, because a shell expands a tilde in text and not in an argument,
and it is the far machine's home that has to answer.
A read has four answers -- text, binary, tooBig, or the machine's own
error -- because a binary file drawn as text and a big one cut off
silently are both wrong in ways the reader cannot see. A write carries
the sha256 the read reported and is refused with a 409 when the file has
moved on, which is what happens whenever an agent is editing the file
somebody is reading.
`Transport::capture_with_input` is the one description of "run this
there, with this on stdin", and `ship_attachment` moves onto it rather
than assembling a second ssh invocation of its own. It is also the only
capture that hands back the exit status, which is how the write says
"this is not the file you read" without that answer looking like a
failure.
Exercised on both transports against the sandbox -- ssh to this VM with a
throwaway key, since the quoting and the stdin path are what that proves
-- including a filename with an apostrophe, one with a tab, an unreadable
file, a binary one, one over the limit, and the 409.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Prints the enrollment URI, one line on stdout, and exits; the running
server adopts the token the first time that device presents it, via the
spool wg-app-link's enroll module now provides (submodule bumped to
d35c880). This is the server half of enrolling through Dev Updater: its
coming per-component Enroll button runs this command and opens whatever
it prints on the phone, which is what a reinstall -- a signing change, a
new phone -- needs when nobody is at the terminal the QR is printed on.
Verified against the sandbox server: minted while it ran, first request
with the token served and the token moved into config.ron, spool empty,
second request served as an ordinary token. 108 tests, clippy clean.
Co-Authored-By: Claude Fable 5.1 <noreply@anthropic.com>
A Rust backend that owns the sessions and an Android app that reads them.
The server spawns and adopts CLI processes, normalises everything they emit
into one event model, keeps the transcript, and serves it over pinned TLS on
a WireGuard interface; the phone streams that, replies, sends images, and
imports conversations the machine already has.
`AGENTS.md` is the working guide -- what runs where, what has been measured,
and the faults that were expensive to find. `PLAN.md` is the design record.
History before this point was squashed away. It was a personal project's
running commentary and carried a name and a couple of machine paths that
have no business in a public repository; the tree is what mattered and the
tree is here.
iris
