Select any of the transcript, and take a queued message back

Two things a reader could not do to what is on screen.

**Selection.** Nothing in the transcript was selectable at all, so a
command, a path or an error message could be read and not copied. One
`SelectionContainer` around the whole list rather than one per row: a
transcript is one body of text to a reader, and a selection has to be able
to run from a reply into the tool output under it. Per row it also could
not, and whatever was drawn without a container would have been silently
unselectable -- a state nothing on screen reports. Rows keep their tap
handlers; checked on the emulator that expanding a tool call, scrolling and
flinging are all unaffected, since a selection is a long press.

**Taking a message back.** A message sent into a running turn sits as a
bubble waiting to be read, and there was no way to change your mind: it is
tappable now, and the server answers `POST /sessions/{id}/unqueue`.

The answer has three states, and the middle one is the point. Claude's
driver writes a steer into the CLI's stdin the instant it arrives -- that
is what makes it reach the model at the next tool boundary rather than at
the end of the turn, and it was measured -- so the line is already gone and
`AlreadySent` is the only honest answer it can give. Holding the write
until a boundary would make the drop real and cost a steer one model call,
which is the latency the immediate write exists to remove; rejected on that
trade, with the reasoning in PLAN.md. The refusal is drawn on the bubble
that was pressed rather than in the error row under the header, a screen
away from it.

Where a driver really does hold its queue -- echo today -- the message goes
for good, and it goes as an `Event::MessageDropped` rather than as a return
value: every device watching the session loses the bubble, and a phone that
reconnects and replays the `messageQueued` does not put back one that was
cancelled with nothing left to resolve it.

AGENTS.md

@@ -245,6 +245,20 @@ first if a remote spawn ever mangles an argument.
   on the same transcript. What that costs is that the rows below slide up
   under the reader's finger, so a row that has just moved ignores taps for
   half a second (`SETTLE_MS`).
+- **All transcript text is selectable, from one `SelectionContainer` around
+  the whole list** (`TranscriptList.kt`). Not per row: a transcript is one
+  body of text to a reader, so a selection has to be able to run from a
+  reply into the tool output under it -- and a container per row leaves
+  whatever was drawn without one silently unselectable, which nothing on
+  screen reports. Rows keep their tap handlers; selection is a long press.
+- **A queued message can be tapped to take it back**, which is
+  `POST /sessions/{id}/unqueue` and a `messageDropped` event -- see PLAN.md's
+  "Taking a queued message back". On a **Claude** session it always refuses,
+  and that is correct rather than broken: the driver writes a steer into the
+  CLI the moment it arrives, so what the bubble is waiting for is the CLI
+  *reading* it, not this server sending it. The refusal is drawn on the
+  bubble. The echo driver really does hold its queue, so that is the rig for
+  the case where the drop succeeds.
 - **Deleting a session offers to take the machine's own transcript with
   it.** `DELETE /sessions/{id}?deleteForeign=true`, behind a switch in the
   confirmation, and only where the driver keeps a record of its own

PLAN.md

@@ -247,6 +247,35 @@ turn. Claude's dialect: a `user` message on stdin mid-stream; pi's: `steer`.
 - Images in: base64 image content blocks in the stream-json user message.
 - Working directory, host, and model are spawn-screen fields.
 
+### Taking a queued message back (decided 2026-08-31)
+
+A message sent into a running turn is drawn as a bubble waiting below the
+transcript, and tapping it asks the server to drop it before the session
+reads it — `POST /sessions/{id}/unqueue {messageId}`, answered by
+`Driver::unqueue` and recorded as `Event::MessageDropped` so that every
+device watching loses the bubble and a reconnect does not replay it back.
+
+The answer has **three** states rather than a yes/no, and that is the whole
+of the design: `Dropped`, `AlreadySent`, and `Unknown`. The reason is that
+the Claude driver can only ever give the middle one. It writes a steer into
+the CLI's stdin the instant it arrives — that is what makes a steer reach
+the model at the next tool boundary instead of at the end of the turn, and
+it was measured (see `Queue`'s doc comment) — so the line is gone before the
+phone could ask for it back. What waits in `awaiting` is the *announcement*,
+not the message.
+
+Holding the write until a boundary was considered and rejected on 2026-08-31:
+it would make the drop real everywhere, but it costs a steer one model call,
+which is the latency the immediate write was introduced to remove. So the
+refusal is the honest answer and it is reported where the reader pressed —
+on the bubble itself, not in the screen's error row, which is under the
+header a screen away. What a tap buys on a Claude session is therefore
+knowing that the session has already been told; on a driver that really does
+hold a queue (echo today) the message goes.
+
+`Unknown` is not "we could not find out": a driver that is gone reported
+everything it was holding when it closed, so there is nothing waiting.
+
 ### Session processes outlive the backend (decided 2026-08-29)
 
 A session's process is **left running when the backend stops, and adopted
@@ -659,6 +688,7 @@ GET  /sessions                        list (id, provider, host, title, model, st
 POST /sessions                        spawn {provider, host, model, cwd, permission_mode, title}
 GET  /sessions/:id/events?after=N     SSE: transcript replay from N, then live
 POST /sessions/:id/message            {text, attachment_ids}
+POST /sessions/:id/unqueue            {message_id}  take back one not read yet
 POST /sessions/:id/answer             {question_id, answer}   (questions and permissions)
 POST /sessions/:id/interrupt          stop the running turn; the process stays
 POST /sessions/:id/stop               end the process; the session and transcript stay

app/androidApp/src/main/kotlin/com/example/aiapp/Api.kt

@@ -492,6 +492,23 @@ fun sendMessage(
     ) {}
 }
 
+/**
+ * Takes back a message the session has not read yet, named by the id its `messageQueued` carried.
+ *
+ * Throws rather than returning an outcome, because both ways of failing are things the reader has
+ * to be told: 409 means the session was already given it, and 404 means nothing is waiting under
+ * that id. The bubble disappearing is the success case and it arrives on the event stream, not from
+ * here -- every device drops it, not only the one that tapped.
+ */
+fun unqueueMessage(settings: ServerSettings, sessionId: String, messageId: String) {
+    requestFromServer(
+        settings,
+        "/sessions/$sessionId/unqueue",
+        method = "POST",
+        jsonBody = JSONObject().put("messageId", messageId).toString(),
+    ) {}
+}
+
 /** Uploads one picked image; the returned id goes into [sendMessage]. */
 fun uploadAttachment(
     settings: ServerSettings,

app/androidApp/src/main/kotlin/com/example/aiapp/Events.kt

@@ -53,6 +53,16 @@ sealed class SessionEvent {
     data class MessageQueued(val id: String, val text: String, val images: List<String>) :
         SessionEvent()
 
+    /**
+     * A queued message taken back before the session read it.
+     *
+     * Recorded by the server for the same reason [MessageQueued] is: a phone that reconnects
+     * replays both, and without this one it would put back a bubble for a message that is never
+     * coming -- with nothing left to resolve it, since the [UserMessage] that normally does is
+     * exactly what was cancelled.
+     */
+    data class MessageDropped(val id: String) : SessionEvent()
+
     data class AssistantText(val delta: String) : SessionEvent()
 
     data class ToolStart(val id: String, val tool: String, val input: String) : SessionEvent()
@@ -183,6 +193,7 @@ fun parseSeqEvent(json: String): SeqEvent {
                     body.getString("text"),
                     body.stringList("images"),
                 )
+            "messageDropped" -> SessionEvent.MessageDropped(body.getString("id"))
             "assistantText" -> SessionEvent.AssistantText(body.getString("delta"))
             "toolStart" ->
                 SessionEvent.ToolStart(

app/androidApp/src/main/kotlin/com/example/aiapp/SessionScreen.kt

@@ -8,6 +8,7 @@ import androidx.activity.compose.rememberLauncherForActivityResult
 import androidx.activity.result.PickVisualMediaRequest
 import androidx.activity.result.contract.ActivityResultContracts
 import androidx.compose.foundation.background
+import androidx.compose.foundation.clickable
 import androidx.compose.foundation.gestures.awaitEachGesture
 import androidx.compose.foundation.gestures.awaitFirstDown
 import androidx.compose.foundation.layout.Box
@@ -371,6 +372,11 @@ fun SessionScreen(settings: ServerSettings, summary: SessionSummary, onBack: ()
         if (event is SessionEvent.UserMessage) {
             queued = queued.filterNot { it.id == event.id }
         }
+        // Waiting, then taken back. From the server rather than from the tap, so every device
+        // drops the bubble and a reconnect does not put back one that was cancelled.
+        if (event is SessionEvent.MessageDropped) {
+            queued = queued.filterNot { it.id == event.id }
+        }
         // Waiting, then gone: a command leaves this list when the session takes it,
         // and the row it becomes is added by `foldEvent` in the same pass.
         if (event is SessionEvent.CommandQueued) {
@@ -883,6 +889,33 @@ fun SessionScreen(settings: ServerSettings, summary: SessionSummary, onBack: ()
             }
     }
 
+    /**
+     * Asks the server to take back a message the session has not read yet.
+     *
+     * Nothing is removed here. The bubble goes on the `messageDropped` the server records, which is
+     * what makes the cancellation the session's own fact rather than this screen's opinion of it --
+     * a second device watching the same session has to lose the bubble too, and this one has to
+     * still lose it after a reconnect.
+     *
+     * The refusal is kept on the message it was about rather than in [actionError]: the error row
+     * lives under the header, and a bubble at the foot of the transcript is the thing that was
+     * pressed. It is the ordinary answer here rather than the exceptional one -- a Claude session
+     * writes a steer into the CLI the moment it arrives, so what is on screen as "waiting" is
+     * waiting to be *read*, not waiting to be sent.
+     */
+    fun takeBack(messageId: String) {
+        scope.launch {
+            val refusal =
+                try {
+                    withContext(Dispatchers.IO) { unqueueMessage(settings, summary.id, messageId) }
+                    null
+                } catch (e: ApiException) {
+                    e.message ?: "this message could not be taken back"
+                }
+            queued = queued.map { if (it.id == messageId) it.copy(refusal = refusal) else it }
+        }
+    }
+
     fun act(onDone: () -> Unit = {}, action: () -> Unit) {
         scope.launch {
             try {
@@ -1154,6 +1187,13 @@ fun SessionScreen(settings: ServerSettings, summary: SessionSummary, onBack: ()
                                             text = waiting.text,
                                             images = waiting.images,
                                             pending = true,
+                                            refusal = waiting.refusal,
+                                            // The bubble goes away on the `messageDropped` this
+                                            // produces, not here: the server is what knows whether
+                                            // the message was still its to take back, and the
+                                            // other devices watching this session have to be told
+                                            // by the same event.
+                                            onTakeBack = { takeBack(waiting.id) },
                                         )
                                     }
                                 }
@@ -1672,6 +1712,11 @@ private fun ProcessAction.perform(settings: ServerSettings, sessionId: String) =
  *
  * [pending] is one the server has taken and the session has not read yet -- drawn quieter, because
  * "said" and "heard" are different claims and the transcript must not merge them.
+ *
+ * A pending bubble is tappable: [onTakeBack] asks the server to drop the message before the session
+ * reads it, and [refusal] is what came back when it would not. The refusal is drawn here rather
+ * than with the screen's other errors because this is where the reader pressed -- the error row is
+ * under the header, a screen away from the bubble they were looking at.
  */
 @Composable
 private fun UserBubble(
@@ -1680,6 +1725,8 @@ private fun UserBubble(
     text: String,
     images: List<String> = emptyList(),
     pending: Boolean = false,
+    refusal: String? = null,
+    onTakeBack: (() -> Unit)? = null,
 ) {
     Box(Modifier.fillMaxWidth()) {
         Card(
@@ -1693,7 +1740,19 @@ private fun UserBubble(
                         if (pending) MaterialTheme.colorScheme.surfaceVariant
                         else MaterialTheme.colorScheme.primaryContainer
                 ),
-            modifier = Modifier.align(Alignment.CenterEnd).padding(start = 48.dp),
+            modifier =
+                Modifier.align(Alignment.CenterEnd)
+                    .padding(start = 48.dp)
+                    .then(
+                        if (onTakeBack == null) Modifier
+                        else
+                            Modifier.clickable(onClick = onTakeBack).semantics {
+                                // The bubble is its own control and its own label; without this
+                                // the only thing to read is the message, which does not say what
+                                // pressing it does.
+                                contentDescription = "Waiting to be read; tap to take it back"
+                            }
+                    ),
         ) {
             Column(Modifier.padding(12.dp)) {
                 // A message can be nothing but an attachment, and an empty line above a picture
@@ -1713,13 +1772,32 @@ private fun UserBubble(
                     if (index > 0 || text.isNotEmpty()) Spacer(Modifier.height(4.dp))
                     SessionImage(settings, sessionId, ref)
                 }
+                refusal?.let {
+                    Spacer(Modifier.height(6.dp))
+                    Text(
+                        it,
+                        style = MaterialTheme.typography.bodySmall,
+                        color = MaterialTheme.colorScheme.error,
+                    )
+                }
             }
         }
     }
 }
 
-/** A message the server has accepted and the session has not read yet. */
+/**
-private data class QueuedMessage(val id: String, val text: String, val images: List<String>)
+ * A message the server has accepted and the session has not read yet.
+ *
+ * [refusal] is why taking it back did not work, kept per message rather than on the screen: two
+ * bubbles can be waiting at once, and an error above them both would not say which one it was
+ * about.
+ */
+private data class QueuedMessage(
+    val id: String,
+    val text: String,
+    val images: List<String>,
+    val refusal: String? = null,
+)
 
 /**
  * Asked before switching model, because switching is not free and the cost is invisible.

app/androidApp/src/main/kotlin/com/example/aiapp/TranscriptItems.kt

@@ -363,6 +363,9 @@ fun foldEvent(items: List<TranscriptItem>, entry: SeqEvent): List<TranscriptItem
         // No row of its own: a message that is still waiting is drawn as a pending bubble below
         // the transcript, and becomes an ordinary one where the session read it.
         is SessionEvent.MessageQueued -> items
+        // The bubble goes away and nothing takes its place: the message was never read, so there
+        // is nothing it belongs above.
+        is SessionEvent.MessageDropped -> items
         is SessionEvent.Settings -> items
         is SessionEvent.Status -> items
         is SessionEvent.Error -> items + TranscriptItem.ErrorMsg(entry.seq, event.message)

app/androidApp/src/main/kotlin/com/example/aiapp/TranscriptList.kt

@@ -7,6 +7,7 @@ import androidx.compose.foundation.layout.padding
 import androidx.compose.foundation.layout.size
 import androidx.compose.foundation.lazy.LazyColumn
 import androidx.compose.foundation.lazy.LazyListState
+import androidx.compose.foundation.text.selection.SelectionContainer
 import androidx.compose.material3.CircularProgressIndicator
 import androidx.compose.runtime.Composable
 import androidx.compose.ui.Alignment
@@ -35,6 +36,14 @@ import androidx.compose.ui.unit.dp
  * What keeps a unit's arrival cheap enough to happen mid-fling: a unit is at most one block of a
  * reply, and its parse is already made by [warm] before the fold that introduces it -- so entering
  * composition costs laying out one paragraph, not parsing a message.
+ *
+ * The whole list sits in a [SelectionContainer], which is what makes every word in the transcript
+ * selectable by the platform's own press-and-hold. Here rather than at each place text is drawn: a
+ * transcript is one body of text to a reader, and a container per row would mean a selection could
+ * never cross from a reply into the tool output that follows it -- and would leave whatever was
+ * drawn without one silently unselectable, which is a state nothing on screen reports. Rows keep
+ * their tap handlers: selection is a long press, and the container passes an ordinary click through
+ * to the card under it.
  */
 @Composable
 fun TranscriptList(
@@ -45,51 +54,58 @@ fun TranscriptList(
     below: @Composable () -> Unit,
     unit: @Composable (TranscriptUnit) -> Unit,
 ) {
-    LazyColumn(
+    SelectionContainer {
-        state = state,
+        LazyColumn(
-        reverseLayout = true,
+            state = state,
-        contentPadding = TRANSCRIPT_PADDING,
+            reverseLayout = true,
-        modifier =
+            contentPadding = TRANSCRIPT_PADDING,
-            // Timed in two halves because the frame's draw phase is where Compose's measurement
+            modifier =
-            // lands, and "draw is high while nothing is being recorded" does not say which half;
+                // Timed in two halves because the frame's draw phase is where Compose's measurement
-            // see [drawAccounting]. Measure includes composing the items that scrolled in.
+                // lands, and "draw is high while nothing is being recorded" does not say which
-            modifier
+                // half;
-                .layout { measurable, constraints ->
+                // see [drawAccounting]. Measure includes composing the items that scrolled in.
-                    val started = System.nanoTime()
+                modifier
-                    val placeable = measurable.measure(constraints)
+                    .layout { measurable, constraints ->
-                    DebugStats.record("measure: the whole transcript", System.nanoTime() - started)
+                        val started = System.nanoTime()
-                    layout(placeable.width, placeable.height) {
+                        val placeable = measurable.measure(constraints)
-                        val placing = System.nanoTime()
-                        placeable.place(0, 0)
                         DebugStats.record(
-                            "place: the whole transcript",
+                            "measure: the whole transcript",
-                            System.nanoTime() - placing,
+                            System.nanoTime() - started,
+                        )
+                        layout(placeable.width, placeable.height) {
+                            val placing = System.nanoTime()
+                            placeable.place(0, 0)
+                            DebugStats.record(
+                                "place: the whole transcript",
+                                System.nanoTime() - placing,
+                            )
+                        }
+                    }
+                    .drawWithContent {
+                        val started = System.nanoTime()
+                        drawContent()
+                        DebugStats.record("draw: the whole transcript", System.nanoTime() - started)
+                    },
+        ) {
+            // The bottom of the screen: what is waiting to be read sits under the newest message.
+            item(key = "below", contentType = "below") { below() }
+            items(count = units.size, key = { units[it].key }, contentType = { units[it]::class }) {
+                val u = units[it]
+                DebugStats.count("unit composed")
+                Box(Modifier.fillMaxWidth().padding(top = u.gap)) { unit(u) }
+            }
+            // Standing in for everything not fetched yet. Only here while there is more -- its
+            // appearance at the top edge is also roughly when the next page is asked for, so what
+            // it
+            // reports is a fetch in flight rather than an end reached.
+            if (moreHistory) {
+                item(key = "history", contentType = "history") {
+                    Box(Modifier.fillMaxWidth().padding(vertical = 24.dp)) {
+                        CircularProgressIndicator(
+                            Modifier.align(Alignment.Center).size(HISTORY_SPINNER)
                         )
                     }
                 }
-                .drawWithContent {
-                    val started = System.nanoTime()
-                    drawContent()
-                    DebugStats.record("draw: the whole transcript", System.nanoTime() - started)
-                },
-    ) {
-        // The bottom of the screen: what is waiting to be read sits under the newest message.
-        item(key = "below", contentType = "below") { below() }
-        items(count = units.size, key = { units[it].key }, contentType = { units[it]::class }) {
-            val u = units[it]
-            DebugStats.count("unit composed")
-            Box(Modifier.fillMaxWidth().padding(top = u.gap)) { unit(u) }
-        }
-        // Standing in for everything not fetched yet. Only here while there is more -- its
-        // appearance at the top edge is also roughly when the next page is asked for, so what it
-        // reports is a fetch in flight rather than an end reached.
-        if (moreHistory) {
-            item(key = "history", contentType = "history") {
-                Box(Modifier.fillMaxWidth().padding(vertical = 24.dp)) {
-                    CircularProgressIndicator(
-                        Modifier.align(Alignment.Center).size(HISTORY_SPINNER)
-                    )
-                }
             }
         }
     }

server/src/routes.rs

@@ -17,6 +17,8 @@
 //!                                      `reset` frame plus the newest window)
 //! POST   /sessions/{id}/message        {text, attachmentIds?}
 //!                                     (starts the process first if it has exited)
+//! POST   /sessions/{id}/unqueue        {messageId} -- take back one not read yet
+//!                                     (409 when the session already has it)
 //! POST   /sessions/{id}/answer         {questionId, answers}  (questions and permissions)
 //! POST   /sessions/{id}/interrupt      stop the running turn; the process stays
 //! POST   /sessions/{id}/stop           end the process; the session and transcript stay
@@ -68,7 +70,7 @@ use tokio::sync::{broadcast, mpsc};
 use tokio_stream::StreamExt;
 use tokio_stream::wrappers::{BroadcastStream, ReceiverStream};
 
-use crate::session::driver::SessionCommand;
+use crate::session::driver::{SessionCommand, Unqueued};
 use crate::session::pending::Operation;
 use crate::session::transcript::{CATCH_UP_LIMIT, CatchUp, SeqEvent, catch_up};
 use crate::session::{LiveSession, SessionInfo, SessionManager, SpawnSpec};
@@ -93,6 +95,7 @@ pub fn router(manager: Arc<SessionManager>) -> Router {
         .route("/sessions/{id}/events", get(events))
         .route("/sessions/{id}/transcript", get(transcript))
         .route("/sessions/{id}/message", post(message))
+        .route("/sessions/{id}/unqueue", post(unqueue))
         .route("/sessions/{id}/answer", post(answer))
         .route("/sessions/{id}/interrupt", post(interrupt))
         .route("/sessions/{id}/stop", post(stop))
@@ -123,6 +126,10 @@ enum ApiError {
     UnknownRoute,
     #[error("{0}")]
     BadRequest(String),
+    /// The request was understood and the state it names has moved on --
+    /// distinct from `BadRequest`, which is a caller that got it wrong.
+    #[error("{0}")]
+    Conflict(String),
     #[error(transparent)]
     Internal(#[from] anyhow::Error),
 }
@@ -132,6 +139,7 @@ impl IntoResponse for ApiError {
         let status = match self {
             Self::NotFound(_) | Self::UnknownRoute => StatusCode::NOT_FOUND,
             Self::BadRequest(_) => StatusCode::BAD_REQUEST,
+            Self::Conflict(_) => StatusCode::CONFLICT,
             Self::Internal(err) => {
                 // The only variant whose real cause isn't safe to hand
                 // back verbatim, and the only one worth a log line.
@@ -900,6 +908,40 @@ async fn message(
     Ok(StatusCode::NO_CONTENT)
 }
 
+#[derive(Deserialize)]
+#[serde(rename_all = "camelCase")]
+#[serde(deny_unknown_fields)]
+struct UnqueueRequest {
+    /// The id the `messageQueued` event carried, which is what the bubble
+    /// on screen is drawn from.
+    message_id: String,
+}
+
+/// Takes back a message the session has not read yet.
+///
+/// The two failures are separate answers rather than one refusal, because
+/// they are different things to whoever tapped: `409` means the session has
+/// already been told and the message is on its way into the conversation,
+/// and `404` means nothing is waiting under that id -- a bubble on screen
+/// that something else has already resolved. See [`Driver::unqueue`]; the
+/// Claude driver can only ever give the first, since it writes a steer into
+/// the CLI the moment it arrives.
+async fn unqueue(
+    State(manager): State<Arc<SessionManager>>,
+    UrlPath(id): UrlPath<String>,
+    axum::Json(body): axum::Json<UnqueueRequest>,
+) -> Result<StatusCode, ApiError> {
+    match lookup(&manager, &id)?.unqueue(&body.message_id) {
+        Unqueued::Dropped => Ok(StatusCode::NO_CONTENT),
+        Unqueued::AlreadySent => Err(ApiError::Conflict(
+            "the session has already been given this message".to_string(),
+        )),
+        Unqueued::Unknown => Err(ApiError::NotFound(
+            "this message is not waiting to be read".to_string(),
+        )),
+    }
+}
+
 #[derive(Deserialize)]
 #[serde(rename_all = "camelCase")]
 #[serde(deny_unknown_fields)]

server/src/session/claude.rs

@@ -57,7 +57,7 @@ use serde_json::{Value, json};
 use tokio::io::AsyncWriteExt;
 use tokio::sync::mpsc;
 
-use super::driver::{Driver, Event, EventSink, ImageRef, SessionStatus};
+use super::driver::{Driver, Event, EventSink, ImageRef, SessionStatus, Unqueued};
 use super::process;
 use super::transport::{Launch, Streams, Transport};
 use crate::config::{ProviderConfig, SessionConfig};
@@ -595,6 +595,24 @@ impl Driver for ClaudeDriver {
         self.send_line(line);
     }
 
+    /// Never droppable, and that is a property of the design rather than
+    /// an omission.
+    ///
+    /// A message queued here has already been written to the CLI's stdin
+    /// -- see [`Queue`], where only the *announcement* waits -- because
+    /// that is what makes a steer reach the model at the next tool
+    /// boundary instead of at the end of the turn. A line in the fifo
+    /// cannot be recalled, so the only honest answers are "the session has
+    /// already been told" and "nothing is waiting under that id".
+    fn unqueue(&self, id: &str) -> Unqueued {
+        let queue = self.queue.lock().unwrap();
+        if queue.awaiting.iter().any(|(waiting, ..)| waiting == id) {
+            Unqueued::AlreadySent
+        } else {
+            Unqueued::Unknown
+        }
+    }
+
     fn answer_question(&self, id: &str, answers: &[String]) {
         let response = {
             let mut state = self.state.lock().unwrap();

server/src/session/driver.rs

@@ -114,6 +114,22 @@ pub enum Event {
         #[serde(default, skip_serializing_if = "Vec::is_empty")]
         images: Vec<ImageRef>,
     },
+    /// A message taken out of the queue before the session read it, by
+    /// somebody tapping the bubble that was waiting for it.
+    ///
+    /// Recorded for the same reason `MessageQueued` is: the queue is the
+    /// server's, so what is waiting has to be answerable from the
+    /// transcript alone. Without it a phone that reconnects replays the
+    /// `MessageQueued` and puts back a bubble for a message that will
+    /// never arrive -- and nothing later would ever resolve it, since the
+    /// `UserMessage` that normally does is exactly what is not coming.
+    ///
+    /// Only ever sent for a message that had not been handed over. One
+    /// that has is not droppable and says so instead; see
+    /// [`Unqueued::AlreadySent`].
+    MessageDropped {
+        id: String,
+    },
     /// A driver has taken one of the user's messages and started reading
     /// it. The manager turns this into the `UserMessage` above, so it
     /// never reaches a phone itself.
@@ -444,6 +460,25 @@ pub enum SessionStatus {
     Unknown,
 }
 
+/// What became of a request to take a queued message back.
+///
+/// Three states rather than a bool because the two failures are not the
+/// same fact. A driver that writes into its session the moment a message
+/// arrives -- which is what `ClaudeDriver` does, so that a steer reaches
+/// the model at the next tool boundary rather than at the end of the turn
+/// -- can never take one back, and a phone that was told only "no" would
+/// have to guess whether it had asked too late or asked about nothing.
+#[derive(Debug, Clone, Copy, PartialEq, Eq)]
+pub enum Unqueued {
+    /// Out of the queue; the session will never read it.
+    Dropped,
+    /// Already handed to the session, so there is nothing left to take
+    /// back. The message is on its way into the conversation.
+    AlreadySent,
+    /// Nothing is waiting under that id.
+    Unknown,
+}
+
 /// Where a driver reports events. Unbounded because producers are child
 /// processes a slow phone must never be able to stall; the transcript file
 /// is the backpressure-free buffer of record.
@@ -463,6 +498,19 @@ pub trait Driver: Send + Sync {
     /// message in the transcript, so a driver that never sends it drops
     /// the message from the conversation entirely.
     fn send_user_message(&self, text: String, images: Vec<ImageRef>);
+    /// Takes back a message that is still waiting, named by the id its
+    /// [`Event::MessageQueued`] carried.
+    ///
+    /// Answering is the whole of the contract: a driver that drops the
+    /// message owes an [`Event::MessageDropped`], and one that cannot must
+    /// say which of the two reasons it is, because they are different
+    /// things to a reader -- "the session has already been told" is worth
+    /// knowing, and "there is nothing under that id" means the bubble on
+    /// screen is stale. The default is the honest answer for a driver with
+    /// no queue at all: nothing of yours is waiting.
+    fn unqueue(&self, _id: &str) -> Unqueued {
+        Unqueued::Unknown
+    }
     /// Answers one question with everything that was chosen, in the order
     /// it was offered. One answer is a list of one; a driver whose dialect
     /// takes a single value joins them where it writes it.

server/src/session/echo.rs

@@ -53,7 +53,7 @@ use std::sync::atomic::{AtomicBool, AtomicU64, Ordering};
 use std::sync::{Arc, Mutex};
 use std::time::Duration;
 
-use super::driver::{Driver, Event, EventSink, ImageRef, QuestionOption, SessionStatus};
+use super::driver::{Driver, Event, EventSink, ImageRef, QuestionOption, SessionStatus, Unqueued};
 
 /// Delay between streamed deltas -- long enough that streaming is visibly
 /// streaming in the UI, short enough that tests waiting on a full turn
@@ -796,6 +796,23 @@ impl Driver for EchoDriver {
         !self.busy.load(Ordering::SeqCst)
     }
 
+    /// Really droppable, which is what makes this the rig for the phone's
+    /// side of it: the held message is this driver's own and nothing has
+    /// been written anywhere, so a tap here exercises the whole path
+    /// through to the bubble disappearing on every device. The Claude
+    /// driver can only ever refuse -- see its own `unqueue` -- so it
+    /// cannot exercise the case where the drop succeeds.
+    fn unqueue(&self, id: &str) -> Unqueued {
+        let mut queued = self.queued.lock().unwrap();
+        let Some(at) = queued.iter().position(|(waiting, ..)| waiting == id) else {
+            return Unqueued::Unknown;
+        };
+        queued.remove(at);
+        drop(queued);
+        self.emit(Event::MessageDropped { id: id.to_string() });
+        Unqueued::Dropped
+    }
+
     fn send_user_message(&self, text: String, images: Vec<ImageRef>) {
         // Announced, because this is a message: every driver owes exactly
         // one `MessageTaken` per message, and one that quietly vanishes

server/src/session/mod.rs

@@ -32,7 +32,9 @@ use crate::config::{
     Config, DriverKind, ProviderConfig, SessionConfig, SetupConfig, SshConfig, TokenEntry,
 };
 use claude::ClaudeDriver;
-use driver::{Driver, Event, EventSink, ImageRef, SessionCommand, SessionStatus, context_after};
+use driver::{
+    Driver, Event, EventSink, ImageRef, SessionCommand, SessionStatus, Unqueued, context_after,
+};
 use echo::EchoDriver;
 use llama::LlamaDriver;
 use transcript::{SeqEvent, Transcript};
@@ -440,6 +442,21 @@ impl LiveSession {
         self.ask("be interrupted", |driver| driver.interrupt());
     }
 
+    /// Takes back a message the session has not read yet, named by the id
+    /// its `MessageQueued` carried. See [`Driver::unqueue`] for why the
+    /// answer has three states.
+    ///
+    /// A session with no process answers `Unknown` rather than being
+    /// reported as a failure, and that is the true answer: a driver on its
+    /// way out already said what it was holding (`Queue::close`), so there
+    /// is nothing waiting to take back.
+    pub fn unqueue(&self, message_id: &str) -> Unqueued {
+        match self.driver() {
+            Some(driver) => driver.unqueue(message_id),
+            None => Unqueued::Unknown,
+        }
+    }
+
     /// Leaves this session's process running and stops attending to it,
     /// for a server that is going away and means to come back. See
     /// [`Driver::detach`].
@@ -2716,6 +2733,86 @@ mod tests {
         );
     }
 
+    /// A queued message can be taken back until the driver has handed it
+    /// over, and the taking back is an event rather than a return value --
+    /// which is what makes the bubble disappear on every device watching,
+    /// and stay gone when one of them reconnects and replays.
+    ///
+    /// Exercised on echo because echo really holds its queue. The Claude
+    /// driver writes a steer into the CLI the moment it arrives, so it can
+    /// only ever answer `AlreadySent`; the case where a drop *succeeds*
+    /// has no other driver to be tested against.
+    #[tokio::test]
+    async fn a_queued_message_can_be_taken_back_until_the_session_has_it() {
+        let dir = tempfile::tempdir().expect("tempdir");
+        seed_echo_only(&dir.path().join("config.ron"));
+        let manager = SessionManager::new(
+            dir.path().join("config.ron"),
+            dir.path().join("sessions"),
+            dir.path().join("models"),
+        )
+        .expect("manager");
+        let info = manager.spawn_session(echo_spec()).expect("spawn");
+        let session = manager.session(&info.id).expect("live session");
+        let mut rx = session.subscribe();
+
+        // A turn long enough that the next message has to wait behind it.
+        session.send_message("/slow 1".to_string(), Vec::new());
+        collect_until(&mut rx, |event| {
+            matches!(
+                event,
+                Event::Status {
+                    state: SessionStatus::Running
+                }
+            )
+        })
+        .await;
+
+        session.send_message("second thoughts".to_string(), Vec::new());
+        let seen = collect_until(&mut rx, |event| {
+            matches!(event, Event::MessageQueued { .. })
+        })
+        .await;
+        let Some(Event::MessageQueued { id, .. }) =
+            seen.iter().map(|entry| entry.event.clone()).next_back()
+        else {
+            panic!("expected the message to be queued: {seen:?}");
+        };
+
+        assert_eq!(session.unqueue(&id), Unqueued::Dropped);
+        let seen = collect_until(&mut rx, |event| {
+            matches!(event, Event::MessageDropped { .. })
+        })
+        .await;
+        assert!(
+            seen.iter().any(|entry| matches!(
+                &entry.event,
+                Event::MessageDropped { id: dropped } if *dropped == id
+            )),
+            "the drop has to be recorded, not merely returned: {seen:?}"
+        );
+
+        // Gone for good: the turn ends without the message ever entering
+        // the conversation, and asking again says there is nothing there
+        // rather than dropping it twice.
+        assert_eq!(session.unqueue(&id), Unqueued::Unknown);
+        let seen = collect_until(&mut rx, |event| {
+            matches!(
+                event,
+                Event::Status {
+                    state: SessionStatus::Idle
+                }
+            )
+        })
+        .await;
+        assert!(
+            !seen
+                .iter()
+                .any(|entry| matches!(entry.event, Event::UserMessage { .. })),
+            "a message taken back must never be read: {seen:?}"
+        );
+    }
+
     #[tokio::test]
     async fn a_command_on_an_idle_session_goes_straight_out() {
         let dir = tempfile::tempdir().expect("tempdir");