iris/tests/cases/layout.rs

//! Where a frame puts things, with no window to put them in.

use iris::harness::{Harness, assert_corners};
use iris::prelude::*;

/// A fixed 100 wide, and the rest of the 400 to its neighbour.
fn two_rects(h: &mut Harness) -> (WidgetId, WidgetId) {
    let left = rect(Color::RED).width(100).add(&mut h.rsc);
    let right = rect(Color::BLUE).add(&mut h.rsc);
    h.set_root((left, right).span(Dir::RIGHT));
    (left.id(), right.id())
}

#[test]
fn a_span_gives_each_child_the_width_it_asked_for() {
    let mut h = Harness::new((400, 200));
    let (left, right) = two_rects(&mut h);

    assert_corners!(h, left, (0, 0), (100, 200));
    assert_corners!(h, right, (100, 0), (400, 200));
}

#[test]
fn a_span_ruled_across_itself_does_not_measure_its_children_there() {
    let mut h = Harness::new((400, 200));
    let child = rect(Color::RED).height(40).add(&mut h.rsc);
    let span = (child,).span(Dir::RIGHT).height(rel(1.0)).add(&mut h.rsc);
    h.set_root(span);

    assert_eq!(h.render.active[&span.id()].size.y, LayoutLen::rel(1.0));
}

#[test]
fn a_span_reports_its_tallest_fixed_child() {
    let mut h = Harness::new((400, 200));
    let short = rect(Color::RED).height(40).add(&mut h.rsc);
    let tall = rect(Color::BLUE).height(70).add(&mut h.rsc);
    let span = (short, tall).span(Dir::RIGHT).add(&mut h.rsc);
    h.set_root(span);

    assert_eq!(h.render.active[&span.id()].size.y, LayoutLen::px(70.0));
}

#[test]
fn resizing_relays_out_against_the_new_output() {
    let mut h = Harness::new((400, 200));
    let (left, right) = two_rects(&mut h);

    h.resize((800, 100));
    assert!(h.needs_redraw());
    h.frame();

    assert_corners!(h, left, (0, 0), (100, 100));
    assert_corners!(h, right, (100, 0), (800, 100));
}

#[test]
fn an_empty_widget_takes_a_share_of_a_span() {
    let mut h = Harness::new((400, 200));
    let gap = ().add(&mut h.rsc);
    let right = rect(Color::BLUE).width(100).add(&mut h.rsc);
    h.set_root((gap, right).span(Dir::RIGHT));

    assert_corners!(h, gap, (0, 0), (300, 200));
    assert_corners!(h, right, (300, 0), (400, 200));
}

#[test]
fn a_child_drawn_twice_moves_once() {
    let mut h = Harness::new((400, 200));
    // The span measures a child and then places it; listing it twice would
    // move it twice. The span's own fixed total is shorter than the window,
    // so the span is centred in it and everything under it carries that.
    let inner = rect(Color::BLUE).add(&mut h.rsc);
    let centered = inner.center().width(200).add(&mut h.rsc);
    let left = rect(Color::RED).width(100).add(&mut h.rsc);
    h.set_root((left, centered).span(Dir::RIGHT));
    assert_corners!(h, inner, (150, 0), (350, 200));

    h.set_len(left, Axis::X, 150);
    h.frame();

    assert_corners!(h, inner, (175, 0), (375, 200));
}

#[test]
fn alignment_accepts_an_arbitrary_fraction_and_changes_at_runtime() {
    let mut h = Harness::new((400, 200));
    let fixed = rect(Color::BLUE).sized((100, 100)).add(&mut h.rsc);
    h.rsc
        .widgets_mut()
        .set_alignment(fixed, Axis::X, AxisAlign::new(0.25));
    h.rsc
        .widgets_mut()
        .set_alignment(fixed, Axis::Y, AxisAlign::NEG);
    h.set_root(fixed);
    assert_corners!(h, fixed, (75, 0), (175, 100));

    h.rsc
        .widgets_mut()
        .set_alignment(fixed, Axis::X, AxisAlign::new(0.75));
    h.frame();
    assert_corners!(h, fixed, (225, 0), (325, 100));
}

#[test]
fn a_resize_lands_where_a_cold_start_would() {
    let build = |h: &mut Harness| {
        let para = wtext(
            "Wrapping shapes one source into as many lines as its container leaves room \
             for, so the height of a paragraph is an answer rather than a setting.",
        )
        .size(20)
        .wrap(true)
        .pad(16)
        .add(&mut h.rsc);
        let below = rect(Color::RED).add(&mut h.rsc);
        let root = (para, below).span(Dir::DOWN).pad(12);
        h.set_root(root);
        (para, below)
    };

    let mut cold = Harness::new((900, 1200));
    let (cold_para, cold_below) = build(&mut cold);

    let mut resized = Harness::new((1920, 1200));
    let (para, below) = build(&mut resized);
    resized.resize((900, 1200));
    resized.frame();

    assert_eq!(resized.region(&para), cold.region(&cold_para), "paragraph");
    assert_eq!(resized.region(&below), cold.region(&cold_below), "below");
}

#[test]
fn a_fixed_box_is_drawn_again_rather_than_stretched() {
    let mut h = Harness::new((400, 400));
    // The panel fills a stack sized by its sibling, so it is first asked in
    // the whole box and then given the shorter one. Reusing it in that fixed
    // box afterwards would leave it whatever height it happened to have.
    let panel = rect(Color::BLUE).add(&mut h.rsc);
    let leaf = rect(Color::RED).height(100).add(&mut h.rsc);
    let stack = (panel, leaf)
        .stack()
        .size(StackSize::Child(1))
        .add(&mut h.rsc);
    h.set_root(stack.align(Align::TOP));
    assert_corners!(h, panel, (0, 0), (400, 100));

    h.set_len(leaf, Axis::Y, 250);
    h.frame();

    assert_corners!(h, panel, (0, 0), (400, 250));
}

#[test]
fn a_moved_subtree_takes_its_children_with_it() {
    let mut h = Harness::new((400, 400));
    let first = rect(Color::RED).height(40).add(&mut h.rsc);
    let inner = rect(Color::BLUE).add(&mut h.rsc);
    let row = inner.pad(10).height(40).region_node().add(&mut h.rsc);
    // 80 of fixed rows in a 400 window, so the span takes 80 and sits in the
    // middle of what it was given.
    h.set_root((first, row).span(Dir::DOWN));
    assert_corners!(h, inner, (10, 210), (390, 230));

    h.set_len(first, Axis::Y, 80);
    h.frame();

    // The row opted into one movable region, so its descendants follow one
    // entry rather than having their primitive regions rewritten.
    assert_corners!(h, inner, (10, 230), (390, 250));
}

#[test]
fn a_fixed_length_child_keeps_it_when_the_box_around_it_grows() {
    let mut h = Harness::new((400, 200));
    let fixed = rect(Color::BLUE).width(50).add(&mut h.rsc);
    let leftover = rect(Color::GREEN).add(&mut h.rsc);
    let panel = (fixed, leftover).span(Dir::RIGHT).add(&mut h.rsc);
    // Changing the bar's width is the only thing that changes the box the
    // panel and everything under it was drawn for.
    let bar = rect(Color::RED).width(100).add(&mut h.rsc);
    h.set_root((bar, panel).span(Dir::RIGHT));
    assert_corners!(h, fixed, (100, 0), (150, 200));
    assert_corners!(h, leftover, (150, 0), (400, 200));

    h.set_len(bar, Axis::X, 200);
    h.frame();

    // The panel's box is 100 shorter, so the fixed child is the same 50 wide
    // against its new start and the one taking what is left absorbs the change.
    assert_corners!(h, fixed, (200, 0), (250, 200));
    assert_corners!(h, leftover, (250, 0), (400, 200));
}

#[test]
fn a_box_with_a_fixed_length_can_be_stretched_on_its_other_axis() {
    let mut h = Harness::new((400, 200));
    // The row is 40 tall whatever happens, which used to make its drawing
    // impossible to take out of: recovering a fraction of a box needs a
    // relative extent, and it has none on that axis.
    let inner = rect(Color::BLUE).add(&mut h.rsc);
    let row = inner.pad(10).height(40).add(&mut h.rsc);
    let filler = rect(Color::GREEN).add(&mut h.rsc);
    // This column is an item in a row, so it takes the width left for it
    // rather than asking for a full row-width in addition to the bar.
    let column = (row, filler).span(Dir::DOWN).add(&mut h.rsc);
    let bar = rect(Color::RED).width(100).add(&mut h.rsc);
    h.set_root((bar, column).span(Dir::RIGHT));
    assert_corners!(h, inner, (110, 10), (390, 30));

    h.set_len(bar, Axis::X, 200);
    h.frame();

    assert_corners!(h, inner, (210, 10), (390, 30));
}

#[test]
fn only_a_region_node_lengthens_the_chain_and_it_can_be_removed() {
    let mut h = Harness::new((400, 200));
    let leaf = rect(Color::BLUE).add(&mut h.rsc);
    let buried = leaf.pad(4).pad(4).pad(4).pad(4).add(&mut h.rsc);
    let bar = rect(Color::RED).width(100).add(&mut h.rsc);
    h.set_root((bar, buried).span(Dir::RIGHT));

    let move_idx = h.render.active[&leaf.id()].parent_move;
    assert_eq!(h.render.moves.depth(move_idx), 1, "only the root region");

    h.rsc.widgets_mut().set_region_node(buried, true);
    h.frame();
    let move_idx = h.render.active[&leaf.id()].parent_move;
    assert_eq!(
        h.render.moves.depth(move_idx),
        2,
        "the opted-in widget's region and the root region"
    );

    h.rsc.widgets_mut().set_region_node(buried, false);
    h.frame();
    let move_idx = h.render.active[&leaf.id()].parent_move;
    assert_eq!(h.render.moves.depth(move_idx), 1);
}

/// A span that sizes from its children passes their `leftover` weight up
/// than collapsing it to one share, so nesting divides the same space instead
/// of re-dividing a share of it.
#[test]
fn nested_spans_divide_the_space_once_however_deep_the_nesting_is() {
    let mut h = Harness::new((400, 200));
    let (a, b, c, d) = (
        rect(Color::RED).add(&mut h.rsc),
        rect(Color::BLUE).add(&mut h.rsc),
        rect(Color::GREEN).add(&mut h.rsc),
        rect(Color::WHITE).add(&mut h.rsc),
    );
    let left = (a, b).span(Dir::RIGHT).add(&mut h.rsc);
    let right = (c, d).span(Dir::RIGHT).add(&mut h.rsc);
    h.set_root((left, right).span(Dir::RIGHT));

    for (i, id) in [a, b, c, d].into_iter().enumerate() {
        let x = i as f32 * 100.0;
        assert_corners!(h, id, (x, 0), (x + 100.0, 200));
    }
}

/// The same space, unevenly nested: weights carried up mean a share is a
/// share of the whole, not of whatever branch a widget happens to sit in.
///
/// Each edge lands on the even division or one step below it, since a share
/// is a fraction of the room and a truncating multiply gives up what that
/// fraction does not divide. What stays exact is that each share starts
/// where the last one ended and the row ends at its own edge.
#[test]
fn an_uneven_nesting_still_gives_every_share_the_same_length() {
    let mut h = Harness::new((400, 200));
    let (a, b, c, d) = (
        rect(Color::RED).add(&mut h.rsc),
        rect(Color::BLUE).add(&mut h.rsc),
        rect(Color::GREEN).add(&mut h.rsc),
        rect(Color::WHITE).add(&mut h.rsc),
    );
    let one = (a,).span(Dir::RIGHT).add(&mut h.rsc);
    let three = (b, c, d).span(Dir::RIGHT).add(&mut h.rsc);
    h.set_root((one, three).span(Dir::RIGHT));

    let mut start = Px::ZERO;
    for (i, id) in [a, b, c, d].into_iter().enumerate() {
        let got = h.region(&id).expect("widget drew nothing");
        let even = Px::from_int((i as i32 + 1) * 100);
        assert_eq!(got.top_left, PxVec2::new(start, Px::ZERO), "share {i}");
        assert_eq!(got.bot_right.y, Px::from_int(200), "share {i}");
        assert!(
            got.bot_right.x == even || got.bot_right.x == even.next_down(),
            "share {i} ends at {:?}, not {even:?}",
            got.bot_right.x
        );
        start = got.bot_right.x;
    }
    assert_eq!(
        start,
        Px::from_int(400),
        "the row stopped short of its edge"
    );
}

/// However many ways a row is divided, the shares add up to the row: each
/// one is the fixed parts before it plus a share of the room, rather than a
/// step from where the last one ended, so the roundings do not accumulate
/// along it. Chained, two hundred of them ended a step short of the edge.
#[test]
fn a_row_of_equal_shares_fills_it_exactly() {
    for n in [2usize, 3, 7, 64, 200] {
        let mut h = Harness::new((1000, 100));
        let mut ids = Vec::new();
        let mut kids: Vec<StrongWidget> = Vec::new();
        for _ in 0..n {
            let kid = rect(Color::RED).add(&mut h.rsc);
            ids.push(kid.id());
            kids.push(kid.add_strong(&mut h.rsc));
        }
        let span = Span {
            children: kids,
            dir: Dir::RIGHT,
            gap: Px::ZERO,
        }
        .add(&mut h.rsc);
        h.set_root(span);
        h.frame();

        for (i, id) in ids.iter().enumerate() {
            let at = h.region(id).expect("a share drew nothing").top_left.x;
            let want = Px::from_f32(1000.0 * (i as f32) / (n as f32));
            assert!(
                (at - want).abs() <= Px::STEP,
                "{n} shares: the {i}th starts at {at:?}, not {want:?}"
            );
        }
        let end = h.region(ids.last().unwrap()).unwrap().bot_right.x;
        assert_eq!(end, Px::from_int(1000), "{n} shares do not reach the edge");
    }
}

/// Where the shader puts an edge: the two parts of a scalar are floored
/// apart, so a fraction and a pixel offset snap independently, and each is
/// taken to the boundary it composes to within half a step of. Kept in step
/// with `snap_floor` in `prelude.wgsl`.
fn drawn_edges(h: &Harness, id: WidgetId, axis: Axis) -> (f32, f32) {
    let active = &h.render.active[&id];
    let region = h.render.moves.resolve(active.parent_move, active.region);
    let dim = h.size().axis(axis);
    let snap = |v: f32| (v + Px::STEP.to_f32() * 0.5).floor();
    let edge = |s: Len| snap(s.rel.to_f32() * dim) + snap(s.px.to_f32());
    let span = region.axis(axis);
    (edge(span.start), edge(span.end))
}

fn hairline(h: &mut Harness, marks: &mut Vec<WidgetId>) -> StrongWidget {
    let mark = rect(Color::RED).width(1).add_strong(&mut h.rsc);
    marks.push(mark.id());
    mark
}

fn share(h: &mut Harness, inner: StrongWidget, ratio: f32) -> StrongWidget {
    h.set_len(&inner, Axis::X, LayoutLen::leftover(ratio));
    inner
}

/// Shares in weights no binary fraction lands on, a padding on one branch
/// and not the other, so an edge falls near an integer as often as it can.
fn hairlines(h: &mut Harness, depth: usize, marks: &mut Vec<WidgetId>) -> StrongWidget {
    let mut span = Span::empty(Dir::RIGHT);
    if depth == 0 {
        let left = rect(Color::BLUE).add_strong(&mut h.rsc);
        let left = share(h, left, 3.0);
        span.push(left);
        let mark = hairline(h, marks);
        span.push(mark);
        let right = rect(Color::BLUE).add_strong(&mut h.rsc);
        let right = share(h, right, 7.0);
        span.push(right);
        return span.add_strong(&mut h.rsc);
    }
    let first = hairlines(h, depth - 1, marks);
    let first = share(h, first, 3.0);
    span.push(first);
    let second = hairlines(h, depth - 1, marks);
    let second = Pad {
        padding: Padding {
            left: Px::from_int(3),
            right: Px::from_int(7),
            top: Px::ZERO,
            bottom: Px::ZERO,
        },
        inner: second,
    }
    .add_strong(&mut h.rsc);
    let second = share(h, second, 5.0);
    span.push(second);
    span.add_strong(&mut h.rsc)
}

/// A one-pixel line is a pixel wherever it is drawn. Both edges of a fixed
/// length share their box's fraction, so composing the chain moves them
/// together and the shader's `floor` cannot round the pixel between them
/// away -- only shift it. A separator that disappeared at one window size
/// would be a defect no size comparison catches.
#[test]
fn a_one_pixel_line_keeps_its_pixel_through_a_chain() {
    let mut h = Harness::new((1920, 1200));
    let mut marks = Vec::new();
    let root = hairlines(&mut h, 4, &mut marks);
    h.state.set_root(root);
    h.frame();
    assert_eq!(marks.len(), 16);

    for size in [(1920, 1200), (1919, 1201), (997, 1003), (1367, 733)] {
        h.resize(size);
        h.frame();
        for mark in &marks {
            let (start, end) = drawn_edges(&h, *mark, Axis::X);
            assert_eq!(end - start, 1.0, "at {size:?}, mark {mark:?}");
        }
    }
}

/// A span short of room takes it from its shares, which go to nothing and
/// then to nothing wider; the fixed lengths between them keep their pixels.
/// Collapsing those to make room would delete a separator the caller asked
/// for, which is worse than overflowing.
#[test]
fn a_span_out_of_room_shrinks_its_shares_and_not_its_fixed_lengths() {
    let mut h = Harness::new((400, 20));
    let mut marks = Vec::new();
    let mut span = Span::empty(Dir::RIGHT);
    for _ in 0..3 {
        let share_of = rect(Color::BLUE).add_strong(&mut h.rsc);
        let share_of = share(&mut h, share_of, 1.0);
        span.push(share_of);
        let mark = hairline(&mut h, &mut marks);
        span.push(mark);
    }
    let root = span.add_strong(&mut h.rsc);
    h.state.set_root(root);
    h.frame();

    for width in [400, 10, 3, 1] {
        h.resize((width, 20));
        h.frame();
        for mark in &marks {
            let (start, end) = drawn_edges(&h, *mark, Axis::X);
            assert_eq!(end - start, 1.0, "at {width} wide, mark {mark:?}");
        }
    }
}

#[test]
fn only_a_pure_leftover_child_disappears_when_nothing_is_left() {
    let mut h = Harness::new((100, 20));
    let fixed = rect(Color::RED).width(100).add(&mut h.rsc);
    let leftover = rect(Color::BLUE).add(&mut h.rsc);
    h.set_root((fixed, leftover).span(Dir::RIGHT));

    assert_corners!(h, fixed, (0, 0), (100, 20));
    assert_eq!(h.region(&leftover), None);

    // An undrawn child remains a dependency of the span, so making room for
    // it draws it without rebuilding the tree.
    h.set_len(fixed, Axis::X, 60);
    h.frame();
    assert_corners!(h, leftover, (60, 0), (100, 20));

    let mut h = Harness::new((100, 20));
    let fixed = rect(Color::RED).width(100).add(&mut h.rsc);
    let mixed = rect(Color::BLUE)
        .width(LayoutLen::px(20) + LayoutLen::LEFTOVER)
        .add(&mut h.rsc);
    h.set_root((fixed, mixed).span(Dir::RIGHT));

    // Pixels and fractions still overflow; only a child whose entire length
    // is leftover is omitted.
    assert_corners!(h, mixed, (100, 0), (120, 20));
}

#[test]
fn leftover_children_disappear_at_the_exact_fixed_content_boundary() {
    let mut h = Harness::new((100, 100));
    let first = rect(Color::RED).height(90).add(&mut h.rsc);
    let a = rect(Color::GREEN).add(&mut h.rsc);
    let b = rect(Color::BLUE).add(&mut h.rsc);
    let inner = (a, b).span(Dir::DOWN).gap(4).add(&mut h.rsc);
    h.set_root((first, inner).span(Dir::DOWN));
    assert!(h.region(&a).is_some());
    assert!(h.region(&b).is_some());

    h.set_len(first, Axis::Y, 96.0);
    h.frame();

    assert!(h.region(&a).is_none());
    assert!(h.region(&b).is_none());
}