Composing a box within another is four multiplies an axis, and two of the
shapes it is asked for compose to nothing: a part that is the whole box is
the box, and a box composed through the whole of its parent is itself. Both
are exact -- multiplying by one on the grid rounds to what it started as --
so four comparisons answer what four multiplies would have.
`many` over 500 frames: 1,742,553,104 instructions to 1,705,786,553, 2.1%
fewer, and 660M cycles to 658M. The cycles are the honest number and they
say this is worth little here; it is kept because instructions are what a
phone pays for and the check is four comparisons.
Checked: fmt, clippy, 105 tests, all five shrinker cases at 300 seeds, the
100-seed generated oracle, and `tabs`, `text` and `random` byte-identical at
1920x1200.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Profiling a move by cycles rather than by instructions says the cost is not
where the last session recorded it. In `apply_scalar` the `i64` division is
**0.00%** of cycles and the multiply 1.5%: the time is in `saturating_add`,
which is five instructions and no vector form for an `i32`, and a box that
only moved does eight of them. Asking for them one scalar at a time, each
behind a match on which kind of move this is, gives the compiler four short
sequences where it had four adds in a row to pair up.
So a translation is now asked for once for the whole region -- which is what
a translation is -- and the match happens once above it rather than per
scalar. `many` over 500 frames: 684M cycles to 660M, and 1,815,666,327
instructions to 1,742,553,104.
Cycle counts are worth trusting here, which is the other thing to keep: three
runs of one binary varied 0.23%. It is wall time that varies 2x on this
machine, not the counters, and instructions alone cannot see a stall.
Checked: fmt, clippy, 105 tests, all five shrinker cases at 300 seeds, and
`tabs`, `text` and `random` byte-identical at 1920x1200.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`UiScalar` was `Len` without the `leftover` weight, which is the separation
canonical `main` already had as `Len` beside `LayoutLen` and this branch
collapsed. It is needed back for the queued clamp: a cap may not contain a
share, because a cap has to read the report a rule otherwise makes moot, and
a share puts the container's division into the same equation -- two
self-consistent assignments, which is the multiple-fixed-point failure
generated seed 13 punished for orthogonal sizing. `min(report, cap)` is not
a `LayoutLen` either: it is a sum of parts, and the smaller of two of them
is not one.
So `UiScalar` is `Len`, what was `Len` is `LayoutLen`, and the two say in
their docs which is which: a `Len` is pixels plus a fraction of a box -- a
position being the length from the box's start, which is why a span is two
of them -- and a `LayoutLen` is a `Len` plus a claim only a container
dividing its room can answer. `From<Len> for LayoutLen` is the one-way step
between them.
Names only; the shader's `UiScalar` is renamed with them. Checked: fmt,
clippy, 105 tests, and `tabs`, `minimal`, `view`, `text` and `random`
byte-identical at 1920x1200.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A placed glyph's offset is whole pixels by construction -- a floored pen
position plus the entry's integer bearing -- and `Painter::glyphs` was
converting it, and the entry's width and height, from `f32` on every frame
that drew the glyph. It is a `PxVec2` now, converted once when the text is
placed, and the size is two integer shifts.
Measured with `perf stat -e instructions:u`, since the difference is smaller
than this machine's clock: the `many` phase went from 2,013,099,594
instructions to 1,938,264,572 over 500 frames, 3.7% less. `scroll` and
`repaint` are unchanged to within noise, which is right -- they do not redraw
glyphs.
Checked: fmt, clippy, 105 tests, the reorder fuzzer at 300 seeds, and `tabs`,
`text` and `random` byte-identical.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
Traced what was left of the warm-against-cold difference after fixed point.
It is not accumulation and not one place: it is the same box reached two
ways, and each way rounds where the other does not.
`Scroll` was writing a box it had been given back out as its own length in
pixels. That is the same box in another form, and centring a part in `rel 1`
lands a step from centring it in `px 900`, because halving a difference is
not halving each part of it. Content that fills the viewport and has not been
scrolled is now handed back as it came, which makes the shrinker's `repaint`
and `resize-repaint` cases agree exactly rather than within a step.
`Span` placed each child a step from where the last one ended, so the
rounding of every share was carried along the row. A position is now the
fixed parts before it -- a sum, exact -- plus one rounded share of the room.
Measured: two hundred equal shares of a 1000 px row ended at 999.999 and now
end at 1000, and `tests/cases/layout.rs` pins it at 2, 3, 7, 64 and 200.
What is left is a step per level of nesting between the two ways, which is
what the fuzzers now allow: four of the five shrinker cases pass at one step
and the fifth is five spans deep. Closing it needs one way of asking where a
box is, which is a bigger change than this.
Checked: fmt, clippy, 103 tests, all five shrinker cases at 300 seeds, 100
generated seeds, five examples byte-identical at 1920x1200.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`Px` and `PxVec2` reach the last places a pixel was a float: the window, the
box a widget reads, the box it is compared against, and `PixelRegion`. A
pointer, a wheel notch and a shaped glyph advance still arrive as floats,
and each is put on the grid where it arrives.
`Holds` is an interval of `Px`. `HOLDS_EPSILON_PX` is gone with the
`exact`/tolerant split it existed for: `at` is the length a widget read, an
open end is the next step along, and `same_px` is equality. `Span`'s margin
from `5ed9e87` goes too -- the box a parent hands back and the sum of what
its children asked for are counts of the same step, so the boundary decides
the same way from either side.
Three things had to be true for that, and were not:
`Holds::through` inverts `px + rel * box`, which rounds -- so a part of a
given length came from a range of boxes, and inverting the length alone gave
a point that need not contain the box the part was drawn in. It now maps the
half step either side, and one more for a length composed down the chain
against the same length measured against the window.
`RegionRemap` translates when a box only moved, rather than dividing to find
each part's fraction and multiplying to place it again. Two roundings landed
a step from where growing the tree that way does; a move is exact on a grid,
which is the whole reason `tests/drift.rs` was written.
A pixel is `1/1024` rather than `1/64`. At `1/64` the residue of a length
reached two ways was one step, and one step was 0.016 px -- enough to move
a box. `PX_SHIFT` and `REL_SHIFT` are the only statement of the grid now,
and the shader's copy is prepended from them rather than written twice.
Checked: fmt, clippy, 102 tests, 100 generated seeds in 75 s, all five
shrinker cases at 300 seeds, and `tabs`, `view`, `minimal`, `text` and
`random` byte-identical at 1920x1200.
What the fuzzers ask for is now a step, not a twentieth of a pixel: the
shrinker's five cases agree within one (`resize` exactly), and the oracle's
two-operation cases within two. The residue is a single rounding either way
-- it scales with the grid rather than accumulating, which is why it is a
thousandth of a pixel now. Closing it means one way of asking how long a box
is, rather than a chain composed down and a length measured against the
window; that is a bigger change than this one.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`Len` is `Px` beside `Rel` beside `Weight`, so the seam `4e28f10` left in
`Span` -- a float length added to a fixed-point cursor -- is gone, and the
sum a span compares against its box is exact.
`Weight` is its own scale, `Fixed<16>`, because a share of what is left over
is not a fraction of anything: a list divides its room by the total of them,
so the range has to hold a whole list's worth while the precision only has to
tell two weights apart. `Rel::ratio` turns two weights into a share on the
finer grid, which is what a span needs and what dividing them on their own
grid would round away.
`AxisAlign` holds a `Rel` rather than a float, which is what the layout was
reading out of it anyway. `Padding` and `Span::gap` hold `Px`, converted
where they are built instead of on every frame. `RegionAlign::rel` is gone;
its one caller wanted a position, and now builds one.
`Fixed` gains `from_num` for a number as it is written in source, `mul_int`
for a length repeated a whole number of times, and `ratio`.
Checked: fmt, clippy, 101 tests, 100 generated seeds in 86 s, all five
shrinker cases at 300 seeds, and all five examples byte-identical at
1920x1200 against `4e28f10`.
With the fuzzer comparing for equality rather than within 0.05 px, four of
the five cases now pass 100 seeds -- `resize-repaint` joins the other three.
`reorder` still fails one seed by one step, so the last of it is in what a
box is measured *in*: `px_len` and the window are still floats.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`UiScalar` is `Rel` beside `Px` rather than two floats, so composing a
position down a chain of boxes adds exactly and rounds only at the two
multiplies `within` makes. `UiSpan`, `UiRegion` and `UiVec2` follow it, the
hand-written `Hash` goes away with the bits it hashed, and `impl_op!` grows a
`same` form for a type whose fields are not the same kind of number.
`Len` is still floats, so the seam converts: `Px::from_f32` where a span adds
a child's length to its cursor, and `to_f32` where something outside layout
wants pixels. Those go when `Len` follows.
The GPU reads what the CPU wrote: the instance attributes are `Sint32x2` and
the shader decodes by `1/64` and `1/2^24`, both exact in `f32`, then composes
the move chain in floats as before. It has to agree with itself frame to
frame rather than with the CPU to the last bit.
Two things fell out of making the numbers exact.
`floor` at the rasteriser was picking the pixel below wherever a fraction
divided a window exactly. A fifth of 1920 is 383.99998 through a rounded
`Rel` -- and was 384.0 through an `f32` that happened to round up -- so five
tabs each lost their last column. `snap_floor` takes a coordinate within half
a step of a boundary to be on it, which is the same rule as everywhere else
here: decide where values do not land.
A widget measured on one layer and drawn again on another kept the first
layer, because `try_reuse` compared everything about a retained drawing
except which list it sits in. `Stack` does exactly that for its background,
so every panel's text went under its own background. It only worked before
because the two asks differed by a rounding and forced a redraw;
`tests/retained.rs` pins it now, and `ReuseOutcome` can say `WrongLayer`.
Checked: fmt, clippy, 100 tests, 100 generated seeds in 70 s, all five
shrinker cases at 300 seeds. `tabs`, `view` and `minimal` render
byte-identical at 1920x1200; `random` differs in 36 pixels by one level;
`text` differs where glyph origins moved onto the grid -- same positions,
same spacing, different subpixel coverage, checked at 6x against the old
render.
Measured on the way: with the fuzzer comparing for *equality* rather than
within 0.05 px, `resize`, `repaint` and `size-change` already pass 100 seeds.
`reorder` fails one seed by exactly one step, which is the `Len` seam above.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
The length kind that asks for a part of what is left once the fixed
lengths are taken is called leftover: Len::leftover(2), Len::LEFTOVER,
Size::LEFTOVER, Len::leftover the field, and apply_leftover. It says
what it is where "rest" reads as "the remainder of the list" as often as
"the remaining space", and every agent who has touched this has reached
for a third word for it.
Locals called rest that meant a region or a widget are renamed with it,
since the word now names something else.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`dp` is coming, and then `abs` says which of the two it is not. The
component has always been a pixel count, so the name that admits it is
the one that leaves room for a second unit beside it.
Mechanical: the field on `Len` and `UiScalar`, their constructors,
`to_abs`/`get_abs`, the matching WGSL struct member and the locals
composing it. Field order and types are unchanged, so the `Pod` layout
the shader reads is the same bytes. `f32::abs` is untouched.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
A widget's region is now held in the coordinates of the slot it draws in
rather than the window's, and `Painter::place` is how a container asks for a
slot: it draws a child it decides the box of and may decide again. Everything
under that slot is a fraction of its box, so placing the child a second time
is one entry to write whether it moved or changed length. A child drawn any
other way has no slot and shares its nearest ancestor's.
That is what keeps the chain short. `chain_cost` measured depth as the cost
-- free to 8, +42.6% at 16 -- and a slot per widget put a transcript's glyphs
past that for nothing, since almost every slot was zero. `Span`, `Aligned`
and `Scroll` are the containers that re-place a child after drawing it, and
`tests/layout.rs` pins that four widgets between a span and a leaf leave the
leaf's chain one deep.
`UiRegion::stretch`, `UiRegion::stretchable` and `UiScalar::stretch` are
gone. Nothing is inverted any more: a box that changed length is written to
its slot, and the descendants recompose against it in the shader. That also
retires the case the guard existed for, where a fixed length has no fraction
to recover -- `tests/layout.rs` now stretches a 40-tall row on its other
axis, which `stretchable` refused outright.
What still walks the CPU is deciding who must draw again, which no chain can
answer: `mark_resized` descends from the widget whose box changed and marks
anything whose own box changed length and whose drawing reads it. A part of
a box with no relative extent on an axis is a fixed length, and composing
into it leaves none either, so the walk stops where a length did not change
-- an 80-wide child in a widened row is not redrawn though it says `Redraw`.
`Span`, `Pad`, `Stack`, `Offset`, `Aligned`, `SetSize` and `LayerOffset` say
`Scale`: each places in fractions and offsets of its own box and none reads
the box's pixel length. `Scroll` and `MaxSize` do read pixels and stay
`Redraw`.
45 tests pass, five of them new. Render verification comes after the CPU
side, per the owner.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
`Remap` existed to invert a composition, and a translation never needed
one: shifting a box shifts everything composed into it by the same
amount, because `lerp(s + d, e + d, t) == lerp(s, e, t) + d` on both
channels. That holds whether or not the box has a relative extent, so
the carry branch was answering a question it did not have to ask.
So the decision is made once, before the walk, and neither relocation
method branches. A translation is already one slot write. A change of
length calls `UiRegion::stretch`, which re-expresses each part at its
own fraction of the new box and needs `stretchable` -- a fixed length
holds its parts as offsets from its start and keeps no fraction to
stretch by.
`Remap`, `UiScalar::outside`, `UiSpan::outside` and `LerpUtil::lerp_inv`
are all gone with it. Nothing inverts a lerp any more: the one division
is done against a denominator `stretchable` already established is not
zero.
What it gives up is the per-axis carry, so a box that changed length on
one axis and not the other is redrawn where it used to be remapped.
Counted: six of `tabs`'s fourteen relocations and five of `text`'s
sixteen, and one extra redraw per frame on `replace_cost`'s 200 rows --
354,310,889 instructions against 354,272,387, which is noise.
Checked: fmt, clippy and 42 tests. `tabs` (with the image replay),
`view`, `minimal` and `text` all still render byte-identical to
`upstream/main`.
Small, and disjoint from #12 — this touches `task.rs`, `harness.rs` and `render_state.rs`, none of which #12 goes near.
`Tasks` held an `Arc<Window>` only to call `request_redraw` when a task finished, which made the task queue, and so `DefaultRsc`, impossible to build without a window. It now takes an `Arc<dyn WakeTaskQueue>`, and `Window` implements it.
Waking also moves from *the task ended* to *an update was sent*, which is when there is actually something for the host to apply. A task that keeps running after sending one no longer holds it until it finishes, and a task that sends none no longer asks for a frame nothing needs.
`iris::harness` is what that buys. `UiRenderState` already does layout, hit testing and primitive building with no surface, so a test can build a tree, run frames, move a pointer and read back where widgets landed. `tests/harness.rs` covers span layout, resize relayout, press routing, hover start and end, wheel scrolling with its clamp, and a task update reaching the tree. None of them could be written before, since the only way into layout was a window.
It does not draw. A claim about pixels still needs a real surface — I checked this one against the rig rather than asserting it: `examples/task` under headless sway, centre pixel `ff0000` before the click and `0000ff` after, so the windowed path still applies task updates under the new wake.
The only core change is `UiRenderState::output_size()`, so that a host reading back the size it set does not have to keep a second copy.
---------
Co-authored-by: iris <2+iris@noreply.localhost>
Reviewed-on: iris/iris#15
Reviewed-by: iris <2+iris@noreply.localhost>
Co-authored-by: AIris <4+iris-ai@noreply.localhost>
iris-aiandClaude Opus 5
